Sash Window Repair
Sash windows can go out of balance and break. Pam scours the web for salvaged Wavy glass, wavy glass, and keep an eye out for scraps of sash weights made of metal. She then seeks replacements, such as washers or nuts to ensure that her window is balanced.
Pam covers each pan with a rope of glazing compound that she puts into the rabbet groove or pocket, which is located around the opening. This prevents drafts and prevent costly heat loss.
Sticking Sashes
It's a nightmare when your double-hung windows become stuck. They'll shake in the event of storms and you'll lose view. A window that's too loose may allow in air and noise which could increase your energy bills. Both scenarios are not ideal, but both could be fixed with the appropriate tools and perseverance.
Paint can build up on the channels of the old weighted sash window tracks, which can cause them to jam. The majority of these issues can be solved by cleaning and oiling the tracks.
Take the caulking off of the space between the window stop (the one on the inside) and the frame of the window. Scrape off any paint that has built up. Be sure to make use of a sharp blade and then put up sheets of plastic and a vacuum cleaner directly below to keep any paint dust and chips.
Then, clean the tracks with a dry cloth and apply a silicone lubricant to ensure better gliding. You can find this at the majority of home improvement stores or online. You can test it by moving the sash upwards or downwards.
If it continues to stop it could be faulty. Verify whether the cord is tangled or hanging in the sash or snapped. If this is the case, you'll need to re-cord the window.
Another possible reason for an obstruction is that a pin that holds the meeting rail in place has slipped out. It isn't easy to fix and you will require the help of a professional the majority times.
You can use a wood softener in the event that the wood is swollen and warped, but there's not a pin. The liquid is quick drying and can repair damaged wood. It's not necessary to take out your sash windows to repair them. After using it, you can pull apart the two sashes by placing a piece of wood on the lower corner of the window where they meet.
Draughts
Draughts are a major problem for windows with sash windows that are old particularly in winter months. Often caused by rotten timbers or cracked putty, worn sash cords or unbalanced weights that allow cold air to seep in around the window and make it difficult to keep your home warm. There are a few ways to prevent draughts from entering your sash windows, such as filling any gaps with expanding foam or draught excluder strips that you can purchase from most hardware stores. They're effective however you'll require replacement periodically as the foam expands over time with usage.
A alternative that is more durable is Gapseal, a spongy rubbbery seal that can be cut to the desired size and then insert into the gaps between the sash window frame. It can be used by itself or with adhesive strips at the top and bottom. This option is fairly expensive and must be reapplied throughout the time of your windows' lifespan, but it is a long-term solution and is easy to remove in the event that you want to open the window.
Cling film can also be used to block drafts. Simply scrunch it up and then insert it into all the gaps that surround your window. This is a great draught stopper, but the drawback is that it can stop sash movement completely and could pose an hazard to fire. Furthermore the sash will have to be removed to open the window again and the cling film will need to be reapplied each time you close the sash.
As part of a complete refurbishment, you can have your window draught-proofed. This could include the replacement of sash cords and staff beads, parting beads, lubrication of the pulley wheels, and rebalancing the weights, and staining or painting the frames and sashes. This can help to restore the function of the sash, and increase its energy efficiency, while also addressing any minor timber defects. It is less disruptive than removing windows and can help reduce draughts, improve the thermal efficiency and dramatically reduce the cost.
Decay
The good news is that your frames for sash windows aren't damaged beyond repair even if they have been damaged or deteriorated. The frames of these windows are generally made of high-quality timber. With the right restoration they can be rehabilitated to give you the best performance for a long time. Regular inspections are crucial, as is ensuring the wood is properly ventilated. This will help prevent the accumulation of moisture that can lead to wood rot.
The majority of issues that arise with sash windows are easily apparent, however some are more difficult to identify. Wood decay is difficult to treat, since fungus eats the wood. While it is possible to repair rotten timber but the best way to avoid future decay is to keep the wood dry.
The first thing to do is to strip any paint off the hardware. The bottom rail and the meeting rail may require removal from the frame (depending on the location of your sash). The "pocket covers", which are small pieces of wood that are placed on the frame's sides that permit access to the weights, will need to be removed. They can be fixed by nailing them in place and then securing them with paint, so you'll likely need to use a knife to cut them loose. Once the pockets are gone, you can begin to remove any wood rot and apply a good quality water-resistant wood filler. Once the filler is dry, it is recommended that a coat of primer be applied to protect against further decay.
It is a good idea to check inside the window the weights of the sash to ensure that they are in balance. They should not be in the wrong alignment, or pulling one side more than the other. The sash may fall off its track if they are not balanced. This could cause the frame to break or become damaged. The sash's weights can be replaced with new ones or a new balancing mechanism can be fitted to stop the sashes from swinging towards the wrong side of the window frame.
Poor Security
As time passes, sash windows can become exposed to the elements and susceptible to deterioration from weather and general wear. This can lead to decay of the timber, which will require replacement. Water marks on the window or a frame that is soft could be a sign of decaying wood. A professional consultation will be required to evaluate the situation and recommend any necessary sash window repair timber windows work.
In time the rails at the bottom can also be damaged. This is evident by the presence of water marks on the sill, or the repairing window becoming soft. A professional will be needed to assess the situation, and recommend any needed replacement of the sash window's seal or replacement.
It can be very concerning when triple or double glazing repairs glazed windows start to let noise pollution back into your home. If this happens, the structural integrity may be in danger and the sash window may require replacement.
One common sash window repair problem is that the sash becomes stuck in the frame. This can be due to the sash cord being snapped, or it could be the result of a problem with the sash the ratchets. If it's the latter scenario, a little gentle persuasion is usually enough to get the window open and then the ratchets will need to be reset.
Removal of the sash from the frame and clearing the tracks of dust or dirt can often help resolve this issue. After cleaning the tracks, take off any security fittings and then remove the chains or cords that hold the sash. A draught seal could be put on the staff bead to decrease the appearance of the paint finish. Decorators caulk can be used to fill the gap between the box of the sash and the sash. This will improve the sash's operation and reduce draughts.