Guide To Upvc Window Replacement Hinges: The Intermediate Guide Towards Upvc Window Replacement Hinges

Choosing Upvc Window Replacement Hinges

The process of selecting and fitting upvc window replacement hinges isn't as complicated as you might imagine. It is important to check the arrows on the hinges is facing the correct way and also the thickness (13mm or 17mm) of the hinge arm on the opening frame.

There are a variety of different kinds of hinges, each with their distinct characteristics. This article will go over some of the most commonly used uPVC hinges, as well as their benefits.

Egress/Easy Clean Hinge

These are a great choice for replacing or upgrading your fire escape safety window since they open up to a full 90 degree angle. They can be removed to an easy-clean position that allows you to see the windows' exterior without the need to climb ladders or lean at dangerous angles.

Yale is one of the most reputable and well-known brands in the world of home security. They are suitable for all types of uPVC side-hung windows. By pressing a tiny button, the window sash can be slid to the side, and then into the clean position. After closing, the window sash will return to its original position.

Both 13mm and 17mm are available. Use our Egress Selection Guide to help you select the best product for your window.

These hinges are compatible with conventional side-hung frames made of upvc tilt and turn window bottom repair hinge, or aluminium windows hinges. They are fitted with an easy-to-use friction screw to alter the amount of resistance generated. This makes opening the window easier and reduces the chances of closing the window accidentally during strong winds. They have been cycle tested to over 30000 cycles and are in compliance with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.

The Nico Egress Easy Clean friction hinge is easy to operate and doesn't have any buttons or catch. It offers a convenient and safe option to emergency exit and cleaning. Press the hinge retention clip located on the inside of the bottom corner. This will open the top and bottom catches, allowing you to slide the sash into an easy-clean position. Once in the easy-clean position close the window to return the hinges to their egress position.

Fire-Escape Hinge

Fire Escape Hinges commonly referred to as "Easy Clean" hinges are used to replace windows that open sideways to allow escape (fire safety) reasons. They allow for a larger opening in the event of fire. This type of hinge is legal in any room with a window hinges replacement as required by building regulations.

The windows have a friction stay that allows the windows to open up to a 90-degree angle. They also let the opening sash to slide over the glass when opened, allowing for easy cleaning without the need to use ladders. The hinges aren't flimsy catch or buttons and are operated with an easy, secure lever that can be accessed from the inside of the home.

The hinges, manufactured in the UK by Cotswold, come with a child safety restriction for daily use. This can be removed by a hidden button. You'll have peace of mind knowing that your children won't open the doors too far. They are available in 13mm or 17mm stack heights.

To order these hinges simply measure the length of your existing side hung window hinge that is fixed to the frame (see the article on measuring the length of your window hinges made of upvc). Select the proper size hinge from the selections below.

It is important to note that the measurement is taken from the part that is fixed to the frame and not the sash. The actual hinge length could be shorter or larger based on the manufacturing process of your old windows. When deciding on the size of the hinge, most upvc frames will fit the 13mm stack height, but if your old window frame is 17mm, then select this option. You can also utilize the 4mm packer to compensate for the difference. The hinges are available in two different directions (1 left and one right). The hinges are not equipped with screws. If required, these screws can be purchased separately. We recommend using our Upvc window hinge repair screws. These screws are designed to enhance the performance of your hinges and allow them to operate efficiently for a longer. They feature a less friction design and a better weather seal that is fitted with a new nylon reducer cap.

Restricted Hinge

There are instances when a window needs to open fully and this can be difficult with a standard hinge. These child safety friction hinges are a fantastic way to solve this problem. They can be used when ventilation is required but cleaning or escape from an fire isn't feasible. They restrict the amount of opening the sash, and allow overriding this limitation by pressing an appropriate button. They can be used for side- and top-hung windows and come in 13mm and 17mm stack heights.

The Nico Restricted Egress Friction Hinge combines the features of a standard restrictor with an escape hinge to provide an efficient and simple method to comply with building regulations. It is suitable for both side hung and top opening uPVC windows and is available in 17mm and 13mm stack heights. It is available as a pair of hinges where one hinge is restricted egress and the second is unrestricted, allowing one hinge to be fitted to the bottom of the sash while the other hinge is installed to the top.

These uPVC hinges are restrictive and have been tested to BS6375 Part 2. They are intended to be used on windows that isn't able to be fully opened, like a small child's bedroom. The mechanism limits how far the sash opens up to 100mm in a safe distance and then re-engages when the window is shut.

As with the other types of uPVC friction hinges that are available, these hinges can be used on any type of window and are perfect for hard to reach windows above the ground level three-storey flats and windows that normally require a ladder for access to them. They can be combined with our range of security features like hinge guard protection plates or dog bolts to provide PAS 24 performance.

When replacing a window hinge it is important to determine the length of the current hinge so that you can get replacements that are comparable in size. The easiest method to do this is to look at the hinge in the image gallery and working out where you want it to be positioned. The top-hung hinges can only be put on one side, while the side-hung hinges can only be positioned on one side.

Standard Hinge

Standard hinges have metal-to-metal contacts and do not require any additional components to reduce friction. It's available in a variety of finishes and fire-rated. To determine the radius of your hinge, lay it flat and line up a dime and quarter in two corners. If the dime fits better than the quarter, the corner is rounded by 1/4 inch. If the quarter fits better, it's rounded to 5/8 inch.

The right hinge can make or ruin the appearance of your door. The style and finish of the hinges to your door will give it an attractive and well-integrated look.