how to open a saab 93 without a key to Replace the Replacement Key Battery For the Saab 9-3
Saab owners must follow a set of special steps to install a second ignition key. This requires an electronic handheld computer, referred to as Tech-2 which is used by the dealer. Then a new car key and transponder need to be bought and programmed to the car.
Rotate your keys to prevent one from wearing out quicker than another. This will help keep your keys in perfect condition.
Replacement Case
The new key fobs do not look like the older Saab keys. They have electronics that make it difficult to copy. This has made stealing cars much more difficult than it was twenty years ago. It also makes it more costly to replace keys that were lost.
Saab 9-3 owners should have two working keys. It's expensive to replace a lost key as it requires replacing the CIM module, and changing the locking cylinders. Dealers charge between $100-$200 to do this.
There are options to avoid these costs. Some parts dealers will find the code from an extra key (usually the same one that opens the doors and turns the ignition) and cut a new key blade out of metal for only a fraction of the dealer's cost. The key, however, must be the same as the original in order to function in your vehicle.
You can also change the case yourself by following these steps. You'll require a flathead screwdriver as well as some patience. With the screwdriver, you can pry apart the plastic and remove the emergency key. When the case is opened take the electronics out and put them back in the new case. Make sure you insert the correct key and badge inside the case.
Replacement Battery
The saab 900 key 9-3 replacement saab key battery is a budget part that can be quickly and easily replaced. This YouTube tutorial for DIY Cyclone Cyd will show you how to program saab 9-3 key fob to replace the battery of the remote key fob in only four steps. This tutorial is compatible with any modern Saab key fob. However, the process might differ slightly.
The first step is to locate the button that will release the backup key on the fob. This button is typically located on the back of the fob close to the Saab Logo. Use a flathead to insert the screwdriver into the small hole on this button. This will allow you to open the case of the fob so that you can replace the battery.
After you have installed the new CR1632 batteries, you can rebuild your remote key fob. Then, you can program it into your car. The entire process shouldn't exceed an hour. This is a very easy process that doesn't require any special tools.
The process can be a bit more complex if you lose your key, but still possible. The dealer must first read the VIN of the vehicle, and then purchase the replacement TWICE module as well as key blade with the proper unique code. After that, they will have to cut the new key and then program it using an innovative software tool called MDI.
Key Replacement Fob
The key fob contains a battery that is used to lock and unlock your car. Batteries have a finite lifespan and eventually die. This is a common problem that happens to all cars, and the good news is that you can change the batteries in most key fobs without replacing the entire case. Amazon sells replacement fobs that already have all the electronic components in place. It is easy to pop the case open and replace the batteries. You'll need to remove the emergency key before you replace the batteries. To do this, you need to insert an small screwdriver with a flat head into the slot that is in the middle of the. The case should split when you rotate the screwdriver around it.
If you're about to replace your keys, ensure that you have a spare, because this can cut down your total cost by a substantial amount. If you have spare keys, you can ask the dealer cut the new key and program it to the car, which is much cheaper than replacing the whole key fob.
It is possible to add a second key to your vehicle If you don't already have one, but it takes a great deal of research and effort. It can cost a few hundred dollars to get a second car key. The computer of the vehicle must also be programmed. Professionals can do this, but it's an expensive option.
Replacement Ignition
The current SAAB 9-3 has an advanced alarm system built around a key code. If you lose only one key, it can be costly to get another one since the car needs to have a specific computer installed and be programmed to accept a brand new key. Dealers can charge hundreds of dollars to program an entirely new key, in the event that they are unable to do it.
If you've lost your sole working key, a dealer will repair the computer in your car (known as the CIM or Saab fob key Replacement TWICE) to make an exchange, and they will charge you a premium price for it. Instead we can reprogramme the EEPROM of your current car computer, preparing it for a new key, saving you over 50% of what you'll have to pay at a dealership.
If you've been a long-time owner of a 03-11 SAAB 9-3, you likely know that the ignition key isn't all that robust. If the ignition key you have isn't working properly, you should consider replacing it. They can become sticky and the buttons are known to fall off. It's not as difficult as it appears to replace the ignition key. With the right tools, it can be accomplished quickly.