Wood burner clearance sale Burning Fires Need to Be Hot and Clean
Wood burning fires (https://lynge-Keller-3.technetbloggers.de/) are not only relaxing and captivating they're also a vital element of our wellbeing and health. But, they must be clean and hot in order to function effectively.
Green wood, or unseasoned wood has high levels of moisture which makes it difficult to ignite and burn efficiently. The seasoned, or kiln dried wood has low moisture content and is therefore easier to ignite and burn for longer.
Efficient Combustion
A wood fire needs to be hot enough to push out moisture and reach temperatures above 540 deg F ( 900 deg F in ideal conditions) in ideal conditions) where the secondary combustion process starts. This is the primary step in efficiently burning the fuel and reducing pollutants smoke, creosote, and accumulation in the flue.
It is important to keep in mind that the temperature required for secondary combustion is dependent on the type of fuel and the conditions in the environment. Use seasoned firewood that has less than 20% to minimize the variations.
The quantity of air being provided to a flame can also have a significant impact on its energy output and time to burn. The more oxygen available, the more hot the fire will burn. A wood fire produces less energy and burn slower when the air supply is limited.
A fireplace or wood stove insert fitted with an adjustable air damper can increase the time to burn and efficiency. A wide-open setting permits the fire to use up all oxygen available and will quickly use up the supply of usable fuel. This is not the case with the fire that is restricted to a small area where the fire is unable to expand as much.
A well-dried firewood load is also essential to efficient wood burning. If wood is cut fresh and hasn't had a chance to dry out it will have a high levels of water, which can be difficult to burn. It is recommended to use only contemporary wood burning stoves that is seasoned and has been stored outdoors for between six and nine months for optimal performance.
The BTU content of wood is another aspect to take into consideration. For example white pine or spruce trees might be less expensive than eastern hardwoods such as black locust and shagbark hickory, but the BTU values of the latter are more, meaning they offer more heat for the same amount of wood. This is why it's important to think about your heating needs and fuel costs when selecting your firewood.
Clean Burning
Wood smoke can trigger indoor air pollutants, which can cause irritation to the lungs and respiratory distress in seniors and children. These pollutants include volatile aromatic hydrocarbons (PAHs) like benzo-a pyrene and formaldehyde as well as volatile organic compounds such as benzene. Volatile tars (such as creosote) are also released when firewood is burnt.
Smoke from poorly-designed wood stoves and fire places could contribute to poor air quality outside wood burners by decreasing visibility and causing photochemical smog. However, new, clean burning fireplaces and wood stoves that incorporate modern combustion technology when used properly, can greatly reduce the emissions.
Stage 1 - Vaporization of moisture: As the log heats it releases water vapour which escapes through the chimney flue. This is more energy-intensive than if the log was dried prior to burning. It also consumes energy that could be used for heating your home.
These vapors combine in the flue with carbon particles to produce smoke. Smoke is one of the major contributors to particulate matter in the air and is among the main sources of smog we see on clear days.
If properly used, wood stoves and fireplaces that utilize clean burn technology can lessen this problem significantly by converting the logs to charcoal-like states, which releases less volatile gasses and releases most of the energy from the log as usable heat.
Avoid using damp, sour or rotten wood to light your fire. It's harder to burn and creates more creosote. Don't over-load your stove with thin and soft wood like pine or fir It takes more energy to burn them, and they produce more smoke that can cause chimney fires.
Always wait until the ashes have cool before handling them. Keep or dispose of ashes in a safe manner. They can re-ignite when exposed to water and are dangerous in landfills. Instead, ensure that you use them around your garden or at the house.
Properly storing, seasoning and burning your wood correctly will save you money on fuel and ensure that your stove is working efficiently. It is also essential to clean your chimney regularly to get rid of creosote and particles, as well as prevent chimney fires and maintain the safety of the operation.
Safety
It's hard to beat a warm fire on a cold winter night however, precautions for safety must be taken. When fires are built incorrectly or left unattended, or if they are burned the risk of dangerous fumes entering the home. Creosote can also build up in the chimney. These deposits can clog the flue, inhibit airflow and cause your wood stove or furnace to run less efficiently.
Never burn treated or painted wood, household trash paper, rags, and other combustible materials in your wood-burning fireplace or stove. They could release toxic fumes such as carbon dioxide and produce toxic gases. Also, do not use flammable liquids to start fires. Gasoline, kerosene and lighter fluid can increase emissions, produce toxic creosote and could cause chimney fires.
Keep combustibles such as furniture, curtains and toys, in a safe distance from your fireplace or stove. Do not hang clothes near or on your fireplace with wood burning. Make sure that children understand that the fireplace is extremely hot and should not be touched.
Use only seasoned wood for your fireplace or stove. Seasoned wood is dried through the summer to decrease the moisture content. Wet woods produce more creosote and smoke, however, seasoned logs burn more efficiently and cleanly. Seasoned wood is darker and has cracks along the grain's end, and sounds hollow when you tap it. Place your logs outdoors and stack them neatly with the top securing, but allowing air to circulate around them.
Appliances that are overloaded produce more smoke and less warmth. Overloaded fires can also generate dangerous levels of carbon monoxide. If you have an older appliance with a metal lining, inspect the liner frequently for signs of wear and tear that can cause an explosion in the chimney.
The EPA recommends using split, dry, and well-seasoned wood to help reduce the amount of smoke you breathe in your home. Build a hot fire by using small pieces. Avoid using softer woods such as pine, which are good starter material to get your fire up and running, but should not be used for anything more than. These woods with resin and sap that is a result of burning, and deposits too much creosote in the chimney.
Maintenance
The warmth of a fireplace that is wood-burning is a wonderful way to enjoy the winter evenings. It is important to keep your fireplace in good condition to get the most enjoyment of it. Regularly cleaning and inspecting your fireplace is the Best wood burning stoves way to avoid problems that may arise. This prevents the accumulation of creosote buildup and keeps the chimney clear to ensure maximum efficiency.
When wood doesn't burn completely, creosote forms in the chimney. If a large amount of creosote builds up it can trigger chimney fires which are the second most common cause of house fires in the United States. The inability of a fire to fully burn is caused by a number of factors including dampers that aren't properly closed and cracks in the liner of the chimney, and a lack or regular cleaning and removal of ash.
Incorrectly seasoned wood causes an excessive buildup of creosote. Water can make up half of the weight of a wood burners for sale piece. The water is heated during the fire and releases heat. It also consumes energy. The water vapor that is produced then condenses into creosote and is released into the air as part of smoke.
Soot is another noxious byproduct of burning wood. Soot, while softer than creosote can block airflow and stick to the walls. It is also a fire hazard because it ignites easily when exposed to combustible gases.
Take the ashes out of your fireplace and place them in an ash container made of metal. Keep it outside on a non-flammable area. The ashes can also serve as an energy source for plants Don't forget to scatter them across the backyard!
Make sure you have your fireplace and chimney inspected by a Regency Dealer certified. The technician can look for cracks, creosote levels, soot levels and a damper that is shut properly, and the condition of the catalyst. If you have a double-stage chimney that includes an air tube, you should remove the catalyst and visually inspected for obstructions. Refer to your user manual for directions on how to accomplish this for your particular unit.