Upvc window handles replacement (look at these guys)
The replacement of your window handles made of upvc is a fairly simple task that requires just a few tools and steps. To ensure a successful replacement, you should first identify the handle type and determine the spindle size.
There are two kinds of handles made of upvc: Cockspur and Espag handles. Espag handles are equipped with a 7mm square spindle which engages the locking mechanism on the frame.
Espag handles
Espag handles are among the most well-known kinds of window handles available for Upvc windows and some timber frames too. They are designed to be used with multipoint locking systems like espagnolette. The handle features a 7mm square shaft that extends out of the back and is then put into the gearbox to create an interlocking system that is multipoint inside the window. They are also available in a variety of spindle lengths. This is due to the fact that each kind of window handle is fixed to a different multipoint locking system, which has a slightly different arrangement and position of the gearbox.
The most common specifications for espag windows handles include a push-button to lock the 'locked' position keys-locking, non-locking fire escapes (where required). Some even meet Secure by Design standards, which will give you peace of mind. They are typically connected to the sash using two screws 43mm apart.
There are several variations of the espag handle. The most popular is the in-line or cranked design. In-line handles can be turned both left and right. Cranked handles can only be operated when the window is moving in the same direction. clockwise or anti-clockwise). They can be attached to the window in either way but it is important that they point in the same direction that the old cockspur handle was.
The most important thing to remember when selecting a replacement window handle made of upvc is to be sure to measure the spindle length. The spindle is a metal bar that extends from the back of the handle. It can range in length from 10mm up to 55mm. The length is the one that is visible when the handle is in its original unbroken condition. It is important to match this when purchasing a new handle since the spindle controls the lock inside the window.
Some manufacturers provide a magnetic espag handles that eliminate the requirement to cut spindles into sizes. This can simplify the fitting process since it is quicker and easier to remove a replacement and insert another. However, it is recommended to take the time to measure the length of the spindle because this will ensure a smooth operation of your handle.
Cockspur handles
Cockspur handles are found on older upvc window handle replacement or aluminium windows. They don't have any locking mechanism, however they are considered safe as the handle nose closes into a wedge-shaped block which is attached to the window frame. (This type of handle is not to be confused with timber frames that feature a catch). Cockspur handles are still very popular and there is a wide range available to match the styles of door.
They are a simple and affordable option and can be key-locked to satisfy home insurance standards. There's also a range of handle nose sizes to suit different frames. A lockable version is also available which adds an extra degree of security to the window and is approved by Secured by Design.
These handle types are fixed to the sash of a casement or tilt and turn window by using a spindle which runs through the baseplate of the handle. The handle is operated by an incline lever located on either side of the handle and the handle spindle is then engaged with the wedge striker that is fitted to the frame of the window to secure it in place. Cockspur handle kits are typically available with right and left hand versions and there is a variety of nose heights that will fit most frames.
The most important thing to consider for the successful installation of cockspur handles is getting the correct wedge block size. It's a tiny block of plastic that is shaped as ramps. You can replace the old handle with one of a slightly larger size to ensure that the handle will close precisely across the gap of the window to prevent drafts. There is some standardisation of fixing locations for these handles and they typically have 38mm and 58mm in size, so you should be able to find the right replacement without too much difficulty.
Another aspect to take into consideration when choosing a new set of cockspur handles is the length of the spindle. It is the distance from the handle baseplate to the point where the shaft of the handle extends through the sash and into the frame. It is important that this is precise so that the handles work smoothly.
Tilt and Turn Handles
Designed specifically for windows that tilt and turn these handles are available in locking, non-locking, or a tilt safe option. They are heavy-duty operating handles that have a strong grip and detents at 90 degree positions. They are available in a choice of finishes including black, white and chrome, as well as brushed satin. Fits Timber or PVCu tilt-and-turn windows.
These handles can be used to replace the handles on older windows that aren't equipped with locks. These handles aren't the same as espag Upvc handles as they are not locked and work differently.
The mechanism called 'turn before tilting' lets the window open to the outside, and then be dropped into a ventilated or hopper-style location for fresh air. This kind handle is also referred to as a DK or dry-keep window handle. It's often used on older double glazed window handles and locks-glazed windows, whether in residential or commercial properties.
When replacing a tilt-and turn window handle, there are a few things to consider. It is important to first make sure that the handle you pick is compatible with your windows. This includes assessing the size of the spindle. The spindle length is the length of the steel rod that extends from the handle and into the locking mechanism. The longer the spindle the more secure it will be.
The handle itself is usually attached to the frame or base of the window using a screw situated between it and the frame depending on the style of the window. You can use a screwdriver remove these screws, and then remove the handle. Before doing this, it is a good idea to put the handle in an open position as this will make it easier to get to both of the screw holes.
After removing the handle, you will find two screws that must be removed. These decorative screw caps will then be revealed. They can be removed with a flat-head screwdriver and then the handles can be removed. The cap on the screw can be replaced once the handles are in the new position on your windows.
Determine the length of the spindle.
The length of the spindle on the window handle is crucial because it determines how the handle will open and close. Different types of handles have different spindle lengths. It's important to measure the length of your old handle prior to buying a replacement. This will ensure your new handle will fit into the window correctly, and be easy to open or close.
If you are looking to replace your handles or enhance the look of your uPVC window, the handle style will have a significant impact on the way that the window opens and locks. There are numerous types of upvc window handles of handles, including inline espagnolette, cranked and key locking. There are also tilt-turn handles that are specifically designed to work with a tilt-turn uPVC window that can open both ways.
To replace windows handles first, look for the screw caps that hold it in place. These are located either above or below the window handle and can be removed with a screwdriver. Once the screws are removed, you can take the spindle and handle from the window frame.
Then, you can take the handle out of the frame of the window and replace it with a brand new one. Make sure the new handle is positioned the same way as the old one and that the spindle is aligned with the lock mechanism. Once the new handle has been installed, it's the time to secure the handle by reinstalling the screws. If you're missing screw caps, you can replace window handles them.
If your uPVC windows handles break, it may be necessary to replace them. The handle may break as a result of a forceful pressure, or the female section which the spindle is placed into could be worn out. This could happen if someone in your home tries to force the handle while it is locked.
The most effective way to replace your uPVC window handle is to buy a top quality one that will last for a long time. This will save you money in the long run. It will also give your home an attractive and modern look.