sash lock door handles (take a look at the site here)
If you're looking to improve the security of your home, without compromising aesthetics, go for sash lock door handles. They can be used with a mortice latch or sash lock and can be combined with a night latch to add locking for internal doors.
The handles are made up of a handle/lever on the backplate. They are usually used with a three or five lever mortice lock. They can be paired with tubes latches.
Lever Lock Handles
There are many types of lever handles that can be matched to any decor. Rustic lever latches work well with ranch or farmhouse style decor and are also popular in modern homes. Classic lever handles are round or spherical and are easy to grasp. They are simple, affordable, and suitable for any type of home decor. Select polished or satin nickel chrome handles for a classy style. These finishes are easy to clean and durable. Other options include antique bronze as well as polished brass. A lot of handles have decorative designs, such as amber worm-eyes or long-horned cyrstals. Some levers have a pin, star or other shape molded in the bottom.
To replace the lever lock door handles first ensure you have the correct screwdriver or a tool to remove them. Depending on the model and design, you may need to employ an awl, or nail to remove the lever handle. Some lever handles feature a small notch or hole on one side of the base which can be used to pry it open.
Follow the manufacturer's guidelines for removing your handles once you have the correct tool. You'll need to determine the spindle size of the new lever handle. Doors that are in use may have been morticed for locks and latches in the past, that require a particular spindle. The majority of lever handle manufacturers use a standard door handle spindle.
If you are replacing the handle of a sash lock the old handle should be removed, and the tubular latch bolt, which sits within the door, needs to be disconnected from the strike plate in the door frame. You will then need to drill a hole into the door frame, insert the latch bolt into it, and connect it to the strike plate in the door frame.
It is essential to keep in mind that when installing the lever handle for the first time the handles that comply with the ADA (Americans with Disabilities Act), are designed to operate by hand. The user should not be required to grip tightly or turn their wrists. To ensure that they meet ADA compliance standards the lever door handle must be operated using only the thumb and finger or the entire hand.
Sash Lock Handles
The primary purpose of sash lock door handles is to pull the sashes that are moving together to form a seal. This helps to maintain the temperature inside the house and also prevents drafts. They are also ideal for doors that don't require the security of a keyed locking system.
Sash locks are sometimes called mortice sashlocks. They combine a dead bolt and latch into a case that is fitted into the material of a door. They work with a pair of door handles and there are a myriad of choices to fit your home.
Lever lock handle is a lever on the backplate, which is cut off beneath it, which permits the use of a key to open the mortice sash lock. This lock is typically used on non-locking interior doors like those found in dining and living rooms. However, it is also possible to use with a tubular lock to provide the security of the door.
These are designed to hold the sash together at multiple points, and include hooks that fit inside the keeper. These are available in a variety of styles and designs that are suitable for various window types like hinged or sliding casement windows. Some are made from cast aluminium, others from brass, and even iron wrought. These are available in different finishes to match other elements of door furniture like escutcheons to guard the keyhole.
The 3 lever sash locks are suitable for doors that are internal. They do not provide the security required by insurance companies. They also are less vulnerable to forced entry than their 5 lever counterparts, which makes them more vulnerable to attack.
A door sash window renovation with five levers is the best option for doors that are external. It offers higher levels resistance to forced entry and is harder to bypass or pick. These locks are a new design that has been tested and certified for compliance with stringent building, fire and disability regulations.
The first step to replace a sash lock handle is to remove the old fastener by taking the screws from each end. Make sure you have a screwdriver in your possession and separate the parts carefully so that you don't damage them. Mark the screw holes using pencil to ensure that you align the new fastener properly when you are ready to put it in place it. Clean any paint or dust particles, and then screw in the new fastener. It is essential to test the handle to ensure it operates correctly and creates an encapsulated seal.
Tubular Latch Handles
The tubular latch is an internal latch that is operated by turning the handle. It is designed to latch the door shut however it does not lock the door as a mortice lock would. They are most commonly used on internal doors, where locking is not necessary. They can be equipped with lever or knob handles.
There are many sizes of tubular latch available. These range from economy through to the highest quality architectural quality. The size you pick depends on the purpose of the door as well as whether you require a lock function. If you need an emergency release mechanism that can be triggered by thumbs an emergency, a lockable latch is needed.
The backset of your door will also determine the latch you select. You must select one that has a backset measurement that matches the distance between the edge and the centre of your door's hole for the handle rose/knob. This will ensure that the door handle and knobs will operate the latch without a hitch.
If you are installing a lever or knob with a spring, or without spring, it is essential to choose an extremely robust tubular latch. It should come with a double glazed sash windows cost-sprung follower. This will ensure a smooth action for the latch, and keep it from becoming sluggish and inactive after regular use.
Once you have selected the appropriate latch for your requirements, the next step is to install it onto the door. The first step is to make sure that the latch is leveled to the top of your door frame/casing. Note the position of the plate and drill holes. Using a countersink drill bit can help create the right recess to rest comfortably in.
Once the latch is installed, you can fix it onto the door. It is important to check that it's functioning correctly prior to fitting the door handles and putting in the locks, so be sure to test it by closing and opening the door several times. If the door isn't working properly, try lubricating the door with WD40. Then re-try it. If you are still experiencing problems, it may be necessary to consult a locksmith or a professional installer.
Keyhole Handles
Keyhole handles are fitted with the tubular latch fitted to the door to allow it to be closed and opened it. When the handle is pushed down, the handle engages the latch and when pulled up, it releases it, allowing the door to be opened. These kinds of handles are typically used on internal doors such as living rooms and dining room doors but can also be fitted to front doors when paired with a nightlatch.
Door knobs are modern handles that incorporate an sprung lever/handle, an oval or round fixing stem and a thumb-turn or escutcheon. They are available in various designs and finishes that will fit the doors of your home. They can be used with Euro cylinders or multipoint locking systems for additional security. This is accomplished by locking the door at multiple points on the height of the door. Door handles that are compatible are required with the correct lock center dimension to accommodate the barrel.
Keyhole escutcheons serve as a cover for the door's keyhole to hide it from view and create a more stylish finish to the handle. They are available in a pop on or screw on style and are available in a variety of finishes to match the door handle. A recessed escutcheon can be fitted to the door's edge to hide the keyhole and provide a more modern look.
Certain handles are compatible with Euro-cylinder locks. They are designed for upvc sash doors and require compatible door handles with a Euro cylinder cutout and suitable screw holes inside the backplate to accommodate the euro cylinder. These handles will also require a Euro Cylinder escutcheon or standard escutcheon depending on the use.
It's important to know the differences between a sash or mortice lock and a tubular latch, as well as the compatibility requirements for each. You'll need to consider the thickness of your door as well as the door hinges and frame reinforcements as well as the backplate of the door handle size, the dimensions of the lock centre and the screw centres for the cylinder.