upvc casement window handle Window Handles Replacement
It's fairly simple to change your upvc window handle. You'll require just a few tools and few steps. To ensure an repair energy efficient window handle replacement, you must first determine the type of handle and determine the spindle size.
There are two types of upvc handles: Cockspur and Espag handles. Espag handles have an elongated 7mm spindle which is connected to the locking mechanism attached to the frame.
Espag handles
Espag handles are a popular option for timber and upvc frames. They are designed to be used with multipoint locking systems that use espagnolette. They feature a 7mm square spindle which extends from the handle's back and then locates in the gearbox of a multipoint lock system within the window. They also come in a variety of spindle lengths. This is due to the fact that each kind of window handle is attached to a distinct multipoint locking system, which has distinct arrangement and position of the gearbox.
Typical specifications of espag window handles include a push-button to lock the 'locked' position keys-locking, non-locking for fire escapes (where is required). Some even meet Secure by Design standards which should give you added peace of mind. They are usually attached to the sash with two screws spaced 43mm apart.
There are several variations to the espag window handle especially the in-line and Cranked design. Those that are in-line will turn both ways while those that are cranked only functional in the direction of travel for the window (i.e. clockwise or anti-clockwise). They can be attached to the window in either way but it is important that they are pointed in the same direction as the old cockspur handle did.
When you are choosing a replacement window handle, just click the following page,, it is crucial to take the time and take measurements of the spindle. The spindle is a metallic bar that extends out from the back of the handle. It can range in length from 10mm to 55mm. It is the length that is exposed when the handle is in its intact state. You will need to measure this when buying a new handle since the spindle is the one that controls the lock within the window.
Some manufacturers provide a magnetic espag handles that eliminate the requirement to cut spindles into sizes. This may make it easier to fit the process because it is quicker and easier to remove the replacement and replace it with another. You should still take the time to take measurements of the spindle to ensure that the handle will operate smoothly.
Cockspur handles
Cockspur handles are available on older uPVC or aluminium windows. They don't have any locking mechanism, however they are considered safe since the handle's nose opens into a wedge-shaped block which is fitted to the frame of the window. (This kind of handle is not to be confused with timber frames that come with an opening). Cockspur handles are popular and are available in various styles to suit all types of doors.
They are an easy and economical choice and they can be key-locking to meet the requirements of home insurance. You can also select the height of the handle to fit your frame. A lockable version is available which adds an extra level of security to the window and is approved by Secured by Design.
These types of handles are attached to the sash of a tilt-and-turn or casement window by a spindle which runs through the baseplate. The handle is operated by the lever that is located on either side of the handle. the spindle of the handle engages with the striker wedge that is fitted to the window frame to secure it. Cockspur handle kits are available in both left and right hand models. There are also a variety of nose heights that fit most frames.
The most important thing to consider for the successful installation of cockspur handles is getting the correct size wedge block. It's a tiny block of plastic that is shaped as ramps and you can replace the old one with a new one with a slightly larger size to ensure that the handle is able to close properly across the gap in the window to seal against draughts. There is some standardisation of fixing locations for these handles. They are usually 38mm and 58mm in size, so you will be able to locate the correct replacement without much trouble.
Another aspect to take into consideration when choosing a new set of cockspur handles is the length of the spindle. This is the distance from the baseplate of the handle up to the point at which the shaft of the handle extends down through the sash to the frame. It is crucial that this measurement is precise so that the handles work smoothly.
Tilt and turn handles
These handles are specifically designed for tilt-and-turn windows. They are available in nonlocking, locking, or tilt safe options. These heavyweight handles offer an extremely firm grip, and the detents are placed at 90 degrees. Available in different finishes such as black, white and gold. Suitable for timber or PVCu tilt and turn windows.
These handles can replace the cockspur made of upvc that was used on older windows, but without locks. However, be aware that these handles are different from espag handles made of upvc as they aren't locked and operate in a different manner.
The 'turn before tilting' mechanism lets the window open to the side, and then be dropped into a ventilated or hopper-style location for fresh air. This kind handle is also known as a DK or dry-keep window handle. It is typically found on older double glazed window handle stuck glazed windows, whether in residential or commercial properties.
There are a lot of things to remember when replacing a tilt and turn window handle. You must first ensure that the handle you pick is compatible with your windows. This includes examining the size of the spindle. The spindle length is the length of the metal rod that extends from the handle into the locking mechanism. The longer the spindle, the more security it will provide.
The handle is typically attached to the frame or base of your window using a screw placed either above or below it depending on the style of the window. You can use a screwdriver remove these screws and then remove the handle. Before you do this, it is recommended to place the handle in an open position to make it easier to access both screw holes.
Once the handle is removed you should be able see two screws that must be removed which will then reveal some decorative screw caps. They can be removed with a flat-head screwdriver and then the handles can be removed. After the handles are moved to the windows, you can put them back in place by replacing the cap of the screw.
Measure the spindle length
The spindle of a window handle determines the way it will open and close. It's important to measure your old handle and compare it to the spindle length of a new one. This will ensure that your new handle will fit in the window correctly, and be easy to open or close.
Whether you need a new handle set or want to enhance your uPVC windows' appearance, the handle type will have a major impact on the way that the window opens and locks. There are numerous types of handles, such as inline espagnolette, cranked and key locking. In addition there are tilt and turn handles that are specifically designed for use with tilt-turn uPVC windows that can be opened both ways.
To replace the handle on a window, locate the screw caps holding it in place. They are typically located above or below the handle, and can be removed using the help of a screwdriver. After the screws have been removed, you can take the handle and the spindle from the window frame.
The handle can be removed from the window frame, and replaced with a new one. Make sure the new handle is positioned the same way that the previous one was and that the spindle is properly aligned with the lock mechanism. After the new handle has been installed, it is time to fix the handle by installing the screws. If you have missing screw caps You can replace them.
It could be necessary to replace the handles on your uPVC window if they break. The handle could break due to a strong force or the female portion where the spindle is inserted has deteriorated. This can happen if someone at home attempts to force the handle when it is locked.
The most effective way to replace your window handle made of uPVC is to buy a top quality one that will last for many years. You'll save money in the end. Additionally, it will give your house an appealing and modern look.