How to Replace a UPVC Window Handle
If your upvc window handle is damaged, don't be concerned. Replacing a window handle made of upvc is a relatively simple task and can be accomplished in a matter of a few steps.
No matter if you have an in-line or a cranked window handle each one has a square spindle that protrudes out of the back plate. This spindle is then placed into the locking device.
Identify the type and size of the handle and lock.
Over time window handles and locks can be damaged or lose their function. It is possible to fix this problem without having to replace the entire uPVC unit. The first thing you need to do is identify the type and size of the lock and handle. This will help you identify the replacement parts you need.
Identifying the type of handle is done by looking at the base of the handle. A screw or pin will secure the handle to its base. If the screw is missing, it could indicate that the handle has split from the base. If the handle is split internally and does not hold onto the spindle anymore, it may also be an indication that the handle needs to be replaced.
There are many different kinds of uPVC window handles, but the most common is the Espag handle. They are usually secured with two bolts, and the spindle engages the locking mechanism in the frame of the window. These handles are usually used on uPVC tilt and turn windows.
Cockspur handles are another type of uPVC handle. These are similar to the Espag handle, however they have a lower projection from the frame. These handles are usually used on older uPVC windows.
Venetian window handles are another alternative. They are similar to Espag handles but have an elongated bottom that lets them to be installed flush with the frame. These handles are a great option for homeowners who want an elegant handle that can be a perfect match with their uPVC frames. These handles are also available in a broad range of colours to match any decor.
Find the spindle's measurement.
Before you purchase a new handle, it's essential to understand how the previous one is attached. This will tell you how it is tight or loose and whether it will fit properly into the window frame. You can do this by identifying what kind of handle you own and determining the spindle length. The spindle is a metallic shaft that connects your handle to the lock in the window frame. The spindle is available in various sizes. The current standard for the industry is 8mm. Older handles might have a 9mm cross-section therefore it's important to determine the cross-section of the old one to make sure you get the proper size replacement.
There are several types of window handles, but the most commonly used are inline Espagnolette and Cockspur handles. They operate a locking mechanism in the window with shootbolt rods that secure the window when it's closed. Depending on the type of handle, they are held in place by screws or pins.
You can buy Upvc handles replacement on the internet or in many DIY stores. They are available in a variety of finishes, and can be used to make new or replacement windows. They can also be key-locking or fire-escape non-locking for extra security.
To remove the old handle just open the window to the door and unscrew all the screws holding it in place. Be careful not to damage the screws, and put them in a container for later use. Once the screws have been removed, gently pull out the handle and take a measurement from the base to the top of the spindle. This will provide you with the information necessary to purchase the correct replacement glass for window near me. The spindle of the handle is the shaft of steel that connects it to the lock gearbox within the window frame.
Take off the handle from the old one.
Changing the handle of an uPVC handle is a straightforward task that takes just five minutes if you've got the right tools. The first step is to determine the lock type and handle that will allow you to identify the right replacement. After that, weighing the spindle will make sure that the new handle is a perfect to the existing one. The old handle needs to be removed and replaced with the new one.
The majority of uPVC handles are inline Espagnolette handles, with an integral spindle that slots into the locking mechanism of the window. They are usually easy to remove, but you may have to apply force when they are stuck. The handle is usually secured by two screws which can be removed by using the help of a screwdriver. You may also need to remove pins, based on the type of handle.
After the screws have been removed After that, you can take off the handle. If the handle is unlocked the top of the baseplate should be visible. This will reveal two additional screws that can be unscrewed. If the sticker is still on, you will need to remove it.
It is now possible to screw in the new handle using the screws from the old handle. Make sure that the handle is in an unlocked or open position, and then align the screw holes with those on the window. After you have done this, replace the screw caps. Test the new handle. It's easy to change a uPVC handle, but you must make it right.
Install the new handle
It's time to install your new handle if you've successfully removed the old handle from the frame. Begin by locating and taking off the screws with your screwdriver. Once the screw covers have been removed, put them in a safe place before proceeding to the next step.
Then screw the spindle in by aligning it with the existing hole. Align the holes on the handle to the ones in the window frame. Make use of a screw of the same size as the previous one.
The uPVC Espag handle comes equipped with a spindle of 7mm square that turns the lock mechanism that is mounted on the window. This type of handle can be found in most modern uPVC windows. uPVC Cockspur handles (also known as Cotswold handles) come with a long nose that locks over the outer frame or transom bar cross members and are typically found in older windows made of uPVC.
It is important to lock and unlock the window several times after the handle has been installed. If everything goes according the plan, the new uPVC handle should be securely fixed and operating smoothly. If not, the steps above will allow you to identify any problems and get it fixed quickly. If you're struggling with your uPVC handle or have any other problems with your glazed home improvement don't hesitate to call us at Bridgewater glass replacement for window for professional assistance. Our glaziers are certified to repair or replace various window handles and frames which makes us a great choice for your double-glazing requirements.
Test the new handle
In time and with regular use over time, uPVC locks and handles may be damaged and wear and tear. They can become less secure and efficient which is why it's important to replace them right away. It's also an ideal idea to do this after you upgrade your windows glass replacement, as changing your lock and handle will ensure the security of your new windows.
When it comes to uPVC window handles, there are many different styles. Some are attached to the frame with pins or screws, while others feature blades that slot into the lock mechanism. Each type has its own method of replacement window, so it is important to know which kind you have before you start working on it.
The most well-known kind of window handle is called the espag. They're typically found on the latest uPVC Windows. The spindle extends from the handle into the lock gearbox and triggers the locking mechanism when you open the window. They're also easy to remove, but you should take care not to damage the mechanism or the handle when doing so.
Cockspur handles are another alternative for uPVC window handles. The locking mechanism is activated when the window is closed or tilted. A spur hooks onto the striker plates that are wedge-shaped on the frame. This kind of handle may be more difficult to fix than other handles, but it's an excellent choice for most homes.
Venetian window handles are held with two bolts. They have a low projection from the frame, in contrast to the Espag handle. These handles are perfect if your goal is to have a flush-fitting handle that blends in with uPVC window frames. These are a great option for residential and commercial properties.