Sash Window Repair
Sash windows can be out of balance, or even break. Pam searches the web for salvaged wavy glasses, and keeps an eye out for discarded sashweights made of metal. She then hunts for replacements in the form of nuts or washers to help balance her window.
Pam will set each pane by putting an edging rope into the rabbet groove, or pocket around the opening. This prevents drafts and costly heat loss.
Sashes that stick Sashes
It's a nightmare when double-hung windows become stuck. They'll shake in the event of a storm, commercial and you'll lose your view. On the other side, a window that's too loose will allow external air and noise in, and your energy bills can increase. This is neither optimal, but both can be fixed with the right tools and a little perseverance.
A common issue with old weighted sash windows is that paint can get sucked into the channels that they slide on, causing them jam. The majority of these issues can be resolved by cleaning and oiling the tracks.
Remove the old caulking from the space between the window stop (the one on the inside) and the frame of the window. Scrape off any paint that has built up. Use a sharp knife and place sheets of plastic as well as a dust-collecting vacuum cleaner below the surface to collect any paint dust or chips.
Then, clean the tracks using a dry cloth, and apply a silicone lubricant for better glide. You can purchase this in most home improvement stores, or on the internet. You can test it by dragging the sash upwards or downwards.
If it continues to jam, the sash cable may be defective. Examine the sash cord to determine if the cord is catching or hanging in the sash, or has snapped completely. If this is the case, you'll need to reconnect the window.
A pin that keeps the rail in place might have fallen out. This isn't easy to fix, and you'll need to consult a professional in most cases.
If a pin isn't falling out but the wood has become swollen or warped it's a good idea to apply a wood hardener to it. This is a quick drying liquid that can aid in restoring damaged wood, so you'll be able to repair your window sash without having to take it off completely. After you've used it you should be able to remove the two sashes by placing a piece of wood on top of the bottom corner where they meet, and tapping it lightly with the hammer.
Draughts
Draughts can be a concern with old sash window particularly in the winter. They can be caused by rotten wood, cracked putty, or worn sash cords. This can allow cold air to enter the window, making it difficult to heat your home. You can prevent drafts by filling in gaps with expanding foam or using draught-excluding strips found in many hardware stores. They are efficient, but they will require replacement periodically because the foam expands with use.
A more permanent solution is Gapseal, a spongy rubbbery seal that you can cut to the size you require and then put into the gaps between the window frames of your sash. It can be used on its own or in conjunction with adhesive strips on the bottom and top of the frame. This option is expensive and you will need to apply it several times over the course of the life of your window. However, it's an effective long-term fix and simple to remove.
Another popular DIY solution to stop drafts is to use cling film that is scrunched up and pushed into all the gaps around your window. This is a great way to stop draughts however it could also hinder the movement of the sash and even cause a fire. The sash needs to be removed to open the window and the clingfilm needs to be reapplied every time the sash is closed.
As part of a comprehensive renovation you can have your sash window professionally draught-proofed. This can include the installation of new sash string, staff beads and parting beads in addition to the lubrication and rebalancing the weights and the lubrication and rebalancing the pulley wheel. It could also involve staining or painting the frames and sashes. This can help to restore the function of the sash and increase its energy efficiency, while also dealing with any minor timber imperfections. It is less disruptive than removing windows and will reduce draughts, increase the thermal performance, and drastically reduce the cost.
Decay
If your sash windows have suffered from damage or decay the good news is they aren't necessarily damaged beyond repair window. The frames of these windows are generally constructed from high-quality timber. With the right restoration they can be repaired to provide high performance for many years to come. The key is regularly checking the frames and making sure that the wood is well ventilated to prevent moisture build up which can lead to wood rot.
Most of the problems that you'll face with sash windows are easily visible on a close inspection, but some are more difficult to detect. Wood decay is difficult to treat, since fungus eats the wood. Although it is possible to lock repair damaged timber however the best method to avoid future decay is to keep the wood dry.
First, remove any paint from the hardware. The bottom rail and meeting rail might need repairs to upvc doors be removed from the frame (depending on the position of your sash). The next step is to remove the "pocket covers" which are bits of wood that are located on the sides of the frame that are low down that allow access to the weights (the parting beads run through the middle of them). These are often nailed in place and stuck with paint, so you'll likely require an instrument to break them loose. Once the pockets are removed, you can begin chiseling out any wood rot and apply a high-quality, water-resistant filler. After the filler has dried, the primer must be applied to prevent further decay.
It is a good idea to examine inside the window the sashweights to make sure they are balanced. They shouldn't be displaced or pulled one side more strongly than the other. The sash can fall off its track if they aren't balanced. This could cause the frame to crack or become damaged. You can replace the sashweights with new ones, or install an entirely new balance system to prevent the sash from swinging the wrong direction.
Poor Security
As time passes sash windows are exposed to the elements and prone to damage from weather and general wear. Over time, this can result in wood decay that is then required to be replaced - costly repair that needs to be addressed as quickly as possible. Wood decay can be spotted by water marks under the window, or the frame becoming soft to touch. A professional consultation is required to evaluate the situation and recommend any needed sash window door repair near me work.
In the same way, over time, the bottom rails can be damaged. Sills that have water marks, or a window that is soft to the touch may be a sign of this. A professional consultation will also be required to assess the situation and recommend any resealing or replacement of the sash window's components.
Double and triple glazed Sash windows do an incredible job at keeping noise from entering your home, and it could be a major cause of concern when they start to let it in. If this occurs the structural integrity could be in danger and the sash windows will need to be replaced.
A typical sash window repair problem is the sash becoming stuck in the frame. It could be due to an untidy cord or an issue with the sash's ratchets. If it is the latter scenario, a little gentle pressure can help the window to be opened to reopen. Alternatively, the ratchets must be reset.
Removing the sash from the frame and cleaning the tracks of dirt or dust will often aid in resolving this problem. After cleaning the tracks, take off any security fittings and carefully remove the sash cords or chains. A draught seal can then be put on the staff bead to decrease draughts and enhance the appearance of the paint finish. The gap between the box and sash can be filled with decorators caulk to improve the operation of the sash and decrease draughts.