Sash Lock Door Handles
If you're looking to increase the security of your home, without compromising aesthetics, go for sash lock door handles. They can be used in conjunction with a mortice lock or sash lock, and can also be combined with the nigh latch to offer additional security for doors.
These handles are a combination of a handle and a lever that is mounted on backplate. They are used with three or five-lever mortice locks. They can be combined with tubes latches.
Lever Lock Handles
There are a variety of lever handles that can be matched to any style. Rustic lever latches work well with a farmhouse or ranch-style decoration and are also very popular in modern homes. Classic lever handles can be round or spherical, and are simple to grasp. They are simple, affordable and fit in with any type of home design. Choose satin nickel or polished chrome handles for a classy look. These finishes are easy to clean and are durable. Antique bronze and polished brass are also alternatives. A lot of handles feature a decorative design, such as tiny amber worm eyes or long-horned crystals. Some levers feature pins, stars or some other shape that is molded into the bottom.
To change the lever lock door handles, you need to have the correct screwdriver, or a tool for disassembling the handles. Based on the design and model you may have to use an awl or nail to remove the lever handle. Some lever handles have a narrow notch or hole on the opposite side of the base which can be used to open it.
Once you have the correct tool Follow the instructions of the manufacturer to take off your old handles. You will need to check the spindle size of the new lever handle. Doors that are morticed (cut into the door) for latches that were previously used or locks, and need to be adapted to a particular spindle size. Most lever handle manufacturers employ a standard door handle spindle.
If you are replacing window sashes a sash window restoration lock door handle the handle that was previously used must be removed and the tubular latch bolt that is located in the door, must be removed from the strike plate that is in the door frame. The latch bolt needs to be inserted into a hole in the frame of the door and connected to the strike plate.
It is important to remember that when you install new lever handles the handles that comply with the ADA (Americans with Disabilities Act) are designed to operate by hand. The user shouldn't be required to grip tightly or turn their wrists. To meet ADA standards of compliance, the lever door handle cannot be operated with the thumb and finger or even the entire hand.
Sash Lock Handles
The primary purpose of sash lock door handles is to pull the moving sashes together to form a seal. This stops drafts from entering the room and also helps maintain the temperature of the home's interior, thereby reducing energy bills throughout the year. They are also ideal for doors that do not require the security of a keyed locking system.
Mortice sashlocks are locks that incorporate deadbolt and latch in one case. They are installed to the door's material. They work with a pair of door handles and there are a myriad of different options to choose from to suit your home.
Lever lock handle operates with the lever that is mounted on the backplate, which is cut off below it, which allows a key to be inserted to open the mortice sash lock. It is typically used for non-locking doors, such as dining rooms and living rooms however it is also possible to pair it with a tubular latch on the inside of a door to make it more secure.
These are designed to hold the sash together for multiple times and come with a hook that fits in the keeper. They come in various styles and designs that can be fitted into various window types like sliding or hinged casement windows. Some are made of cast aluminium while others are made of brass or wrought iron. They're available in a variety of finishes that match other elements of your door furniture like escutcheon plates to guard the keyhole.
The 3 lever sash locks are only suitable for internal doors. They do not provide the security level required by insurance companies. They are also less resistant to forced entry than their 5 lever counterparts, making them more vulnerable to attack.
A door sash lock that has five levers is a more secure option for exterior doors because it provides higher levels of protection against forced entry and is much more difficult to pick or bypass. The locks are upgraded in design that has been tested and certified to comply with stringent fire, disability and building requirements.
To replace the handle of a sash lock, remove the old fastener from both ends by taking off the screws. Make sure you have a screwdriver on hand, and carefully separate the components to prevent damage. Mark the screw holes with pencil to ensure that you align the new fastener properly when you are ready to put it in place it. Clean up any dust or flecks of paint and then screw the new fastener in. Test the handle to ensure it is working correctly and forms an airtight seal.
Tubular Latch Handles
The tubular latch is a latch mechanism that is positioned inside a door and can be operated by turning your handle. It is designed to latch the door shut, but it does not secure the door as mortice locks do. They are typically used on internal doors where there is no requirement for locking. They can be fitted with knob handles or levers.
Tubular latches are available in different sizes. These range from economy through to high-end architectural quality. The size you select will depend on the purpose of the door and if you require a lock function. If you need the thumbturn release mechanism in an emergency situation, then a lockable latch is needed.
The selection of the correct latch is dependent on the backset measurement of your door. You must select one that has a backset measurement that matches the distance between the edge and the centre of your door's opening for the handle rose/knob. This will ensure that your door handle or knobs can operate the latch with ease.
If you are installing a spring or unsprung lever or door knob it is essential to choose a durable tubular latch with an oversized sprung follower and tongue. This will provide an easy action for the latch, and keep it from becoming sluggish or ineffective with frequent use.
The next step is to mount the latch onto the door. First, make sure that the latch is at a level with the top of the door frame or casing by measuring and marking the location of the latch plate then drilling holes for it. Using a countersink drill bit will aid in creating the correct recess for it to rest comfortably in.
After the latch has been installed, you can install it onto the door. Before installing your locks or handles it is essential to check that the latch functions correctly. To check, open and close the door a few times. If it is not functioning correctly, try lubricating it with WD40 before trying it. If you continue to encounter issues, it could be necessary to talk to a locksmith or professional installer.
Keyhole Handles
Keyhole handles work with a tubular latch installed inside the door. The latch is used to open and close the door. The handle engages the latch when pushed down and then releases it when pulled up. These kinds of handles are most often used on internal doors like living rooms and dining room doors but can also be fitted to front doors if combined with a nightlatch.
Door knobs are more modern handles that incorporate an sprung lever/handle, a square or round fixing stem and a thumb-turn or escutcheon. They come in various styles and finishes to match the doors in your home. They can be used in conjunction with Euro cylinder locks or multipoint locking systems that provide additional security to the door. This is achieved through several points of locking along the door's height and requires compatible door handles with the proper lock centre size to accommodate the barrel of the cylinder.
A keyhole escutcheon covers the keyhole on the door to conceal it and give the handle a sleek appearance. They come in both an open or screw on design and come in a variety of finishes to match the door handle. A recessive escutcheon can be affixed to the door's edge to further conceal the keyhole and create a more modern look.
The majority of the handles described above are designed to be used with either a mortice lock or the sash window cost lock mechanism. However some are compatible with Euro Cylinder locks too. These handles are suitable for uPVC doors and require handles that have a Euro cylinder hole and screw holes in the backplate. These handles will also require a Euro Cylinder escutcheon or standard escutcheon based on the use.
If you decide to use a mortice lock, sash lock or tubular latch for your door, you need to know the distinct features of each and the requirements they must meet for compatibility with the other components of your uPVC door system. You'll have to take into consideration the thickness of your door, door hinges and frame reinforcements as well as the door handle backplate size, lock centre dimensions and the screw centres for the cylinder.