sash window locks with key (over here)
Sash windows can be difficult to secure. The basic centre catch found on a majority of windows with sash locks can be opened with screws or a knife.
There are many options to increase security while keeping the classic appearance of timber sash windows. Some of the least obvious options include opening restrictors and barrel fasteners.
Sash stops
Installing the security lock on an old sliding frame timber window with a sash can be a great way to stop children from opening the window and climbing inside. You can install this lock yourself and it's not expensive.
There are a variety of options for locking sash windows, however we suggest the Migstop restrictor by Mighton. This spring-loaded device can be shut or opened using the key. It also stops the window from moving beyond a set limit, which is great for parents with small children.
To attach the fastener begin by closing and locking the window. Mark the location of the hole using pencil on both sides of the frame, then drill the holes. After you've drilled the holes, you can place the fastener in its place and secure it with the screws provided. You should also check the fastener to ensure it opens and closes easily and doesn't have catches sticking out.
Sash stops are attached to the upper sash. They stop the sashes from sliding over each one. They are unobtrusive and easy to fit but only work if they are fitted to the correct position in the window. You can also use sash bolts that are more difficult to remove but require a key.
These bolts are put through the top and bottom of the upper sash, which prevents them from being opened. These bolts are available in two different types: protruding bolts that can only be removed by an appropriate tool or pick bolts that can be removed. They can be used in combination with sash stoppers that are fitted to the frame to allow an opening gap of 100mm, allowing the fresh air to flow inside without risking burglary.
A frame-to-frame lock is fitted at the bottom of the lower and upper sash. They can be opened by the use of a key and are more secure than traditional sash stoppers. However, they may not be suitable to those with disabilities or those who have difficulty operating traditional windows for sash.
Sash bolts
A sash bolt is one of the simplest and least expensive methods to secure sash windows. They are installed between the inner and outer frames to stop the sash from being forced open. They are simple to install and are available in a range of sizes that fit the majority of windows with sash. Always put them in pairs to ensure the best security. They can also be a great alternative to the simple catch that holds the sashes in place although you should still pin your windows for maximum security.
A sash window bolt comes with a brass casing that is drilled into the lower sash. A bolt is then inserted into this and locked into place using the key. This effectively joins the two sashes, making them inaccessible without a key. They will not stop the window from sliding, which means you will have to use the lever or pull cord to open it.
A frame-to-frame lock is another kind of sash lock. It is situated on top of the inside lower sash and is secured with the push-in bolt. It can be key-operated or automated. It is extremely secure. It's also fairly simple to install and is a great alternative for older sash windows.
It is crucial to keep your sash windows well maintained to ensure that they function properly. It is crucial to repair any damaged parts as soon as you can. You can get help from a sash windows service by sealing your windows and repainting them to avoid decay in the wood. They can also fix drafts to improve your home's energy efficient.
Surface-mounted locks
These are fitted on the frame of a sash window and prevent it from opening too wide. These locks don't act as a handle but instead restrict the window by securing it to the frame with a bolt. They can be used on either double or single-hung vertical sliding sash windows. They are suitable for second-floor windows. They are not suitable for first floor windows because burglars are able to still break into the window.
There are many different styles and finishes. Some are equipped with protruding bolts that can be removed using the use of a key, while others are concealed inside the frame. They're more expensive, but provide greater security and could be more effective in preventing criminals. However, they aren't as simple to install as bolts for sash and require special tools.
It's important to choose an established company to complete your installation or replacement project. Make sure you check the credentials of a company's, reviews, social media profiles and certifications to ensure that you are receiving the best service possible. It is also advisable to compare quotes from different firms to compare services and costs. After the work has been completed, it's important to test your new fasteners to ensure that they shut and open exactly as they should and that they are secure.
A child-proof lock is installed on sash windows. These can be used to stop children from opening the window and are available in a range of colors and sizes. Some feature a lever that rotates around the quarter of a circle to place the catch that is mounted on the lower frame of the window. This kind of fastener is usually mounted at a height that children isn't able to reach it with their hands.
While window screens with locks can make you feel more secure but they're not a defense against determined burglars. These locks are not designed to stop children from falling through windows and should not be relied on to do so. Instead, you should use windows that allow ventilation but is difficult for anyone to open without a special key. These sash window locks are also known as dual screw locks. They have an elongated bolt that fits into an opening on the inside of the sash, and another bolt that slots into the hole on the frame of the casement window sash. They are simple to install and provide more security than sashstops.
Keyed Sash locks
You can prevent criminals from breaking into traditional sash windows. It's a good idea have them assessed and repaired. This will ensure that they're operating properly and are equipped with security features. This makes it more difficult for criminals, and they might quit and find a new victim.
Installing sash window cost stops in the frame is a excellent idea. They will stop the window from opening beyond a certain amount. They can be placed on either side of the frame and are available in protruding and non-protruding styles. They're easy to fit and are usually made from zinc diecast with white-painted finishes. They are also very robust and can be locked with a key.
In addition to sash stops and sash bolts, you can also add sash bolts to the frame. These are bolts that go through an opening in the middle of the sash and into a slot on the exterior sash. The bolts prevent the sash being pulled open. They can be put in as a pair to offer maximum protection.
By adding these to your sash windows will not only increase security but will improve efficiency and energy efficiency. This is because they prevent the sash from being pulled out, which decreases the possibility of draughts as well as heat loss. They are available in both protruding and non-protruding designs and you can purchase them by themselves or in sets.
It is important to keep in your mind that you shouldn't count only on these security measures since criminals are always looking for ways to get around them. This is why it's important to install a solid core door and ensure that your locks are working correctly. This will help to deter criminals from attacking your home, and will also increase your peace of mind. When installing new sash locks it is best to leave it to professionals to ensure that they're installed correctly and do not interfere with the operation of your windows. For further peace of mind it is also possible to look for a business that has excellent reviews and social media.