How to Replace the Replacement Key Battery For the saab 93 key fob 9-3
Saab owners have to follow a series of steps that are unique to add a second ignition key. It requires dealer service with a handheld computer called Tech-2. Then the transponder must be replaced and a key must be purchased.
It is a good idea to rotate your keys so that one doesn't wear out more quickly than the other. This will help keep your keys in pristine condition.
Replacement Case
In contrast to the traditional saab 9-3 key not accepted contact service, https://beautyfile8.werite.Net/, keys of the past keys, the new key fobs are equipped with electronics which makes it more difficult to copy. This has made car theft much more difficult than twenty years ago. However, it has made replacing lost keys an incredibly expensive endeavor.
Every owner of a Saab 9-3 must have at a minimum two functioning keys. If one is lost it costs a fortune to replace it in the car because it involves replacing the CIM module and reprogramming the locking cylinders. Dealers usually charge between $100-$200 to do this.
There are a few ways to avoid these high cost. Some parts dealers can look up the code on a spare key (usually the same one that opens the doors and turns off the ignition) and cut a brand new key blade from metal for just a fraction of dealer cost. The key, however, must be the same as the original in order to function in your car.
You can also change the case yourself by following these steps. You'll require an open-faced screwdriver and a lot of patience. With the screwdriver you can pull off the plastic and then remove the emergency key. Once the case is open remove all electronics and put them back in your new case. Be sure to put the correct key and badge back inside the case, too.
Replacement Battery
The Saab 9-3 replacement battery is an inexpensive component that can be easily and quickly replaced. This YouTube DIY video Cyclone Cyd shows how to replace the battery for the remote key fob in only four steps. This tutorial is compatible with any modern Saab key fob. However, the procedure may differ slightly.
The first step is to find the button that lets off the backup key on the fob. The button is usually found on the back of your fob next to the Saab Logo. Use a flathead screwdriver to insert the screwdriver into the small hole in this button. This should be sufficient to open the fob case in order to change the battery.
Once you have installed the batteries CR1632, you can restore your remote key fob. Then, you can program it into your car. The entire process should not exceed an hour. This is a very easy procedure that doesn't require special tools.
If you lose your key, the procedure will be a bit more involved however, it can be completed. The dealer must first read the VIN of the vehicle and order the replacement TWICE module as well as key blade with the proper unique code. The dealer will then have to program the key using MDI which is a new software tool.
Replacement Key Fob
The key fob comes with a battery that is used to lock and unlock your vehicle. The batteries last for a certain time and eventually expire. This is a frequent issue in all vehicles. The good thing is that you can replace the battery on most key fobs without having to replace the entire case. Amazon sells replacement fobs with all the electronic components installed. It is easy to pop the case open and replace the batteries. It is important to remember that you'll need remove the emergency key first, and you can do this by inserting the screwdriver of a small flathead into the slot that is located in the middle of the case. The case will split as you move the screwdriver around it.
If you're ready to change your keys, have a spare available. This can save you a lot of money. If you have an additional key, ask the dealer to cut it and program it for your vehicle. This is a lot less expensive than buying a new key fob.
It is possible to add another key to your car in the event that you don't have one, but it takes a great deal of research and effort. A second key can cost several hundred dollars and also requires programming of the car's computer. This can be done by a professional, however it's a costly choice for most owners.
Replacement Ignition
The current SAAB 9-3 is a more sophisticated alarm system that is based on a key code. This means that should you lose only one working key, replacing it with an additional one could be extremely expensive as the car has to have a special computer module installed and it must also be programmed to accept a new key. Locksmiths typically aren't able to program this, and even dealers can charge several hundreds of dollars just to program the new key!
If you've lost only one working key the dealer will replace the computer in your car (known as the CIM or saab 93 key TWICE) to create an exchange, and they will charge top dollar for it. We can reprogram the current EEPROM on your car's computer so that it's ready to accept an additional key. This will save you more than 50% off the cost you pay at the dealer.
If you've been an owner of an 03-11 SAAB 9-3, you probably are aware that the ignition key isn't really all that robust. They can become incredibly sticky, and the buttons can fall off of them at times It is recommended that you consider replacing your ignition key if it isn't working properly. It's not as difficult as it seems to replace the ignition key. With the proper tools, it can be accomplished in a matter of minutes.