upvc window handles replacement - use this link -
Switching your window handles made of upvc is a relatively easy process that requires a few simple tools and steps. The key to successful replacement is to identify the handle type and measuring the spindle length.
There are two types of handles made from upvc: Cockspur and Espag handles. Espag handles come with a 7mm square spindle that connects to the locking window handles mechanism fitted to the frame.
Espag handles
Espag handles are a common option for upvc and timber frames. They are designed to work with espagnolette multipoint locking systems. The handle has a 7mm square shaft which protrudes out of the back and is then inserted into the gearbox for an interlocking system that is multipoint inside the window. They are also available in a variety of different spindle lengths. This is because each type of window handle is usually connected to a different multipoint locking system that has a slightly different design and layout of the gearbox.
The standard specifications for an espag windows handle include a push button to lock the window in the closed position. They also have a key-locking feature and, if required, a fire escape lock-out feature. Some even exceed Secure by Design standards, which will give you peace of mind. They are usually attached to the sash with two screws 43mm apart.
There are several variations to the espag window handle particularly the in-line versus Cranked design. The ones that are in-line can turn both left and right, while those that are cranked are only able to be operated in the direction of travel for the window (i.e. clockwise or anti-clockwise). They can be fixed to the window in any way but it is important that they point in the same direction the old cockspur handle did.
The most important thing to keep in mind when selecting a replacement window handle made of upvc is to be sure to determine the length of the spindle. The spindle is a metal bar that protrudes from the back of the door handle. It can range in length between 10mm and 55mm. It is the length that is exposed when the handle is in its intact state. This is the length that you will have to match when you purchase an additional handle, because the spindle is the one that drives the lock inside the window.
Some manufacturers now offer magnetic espag handles that eliminate the need to cut the spindle into a size. This can streamline the process of fitting by making it quicker and easier to remove and install an alternative. However, it is recommended to take the time to check the spindle length to ensure the smooth operation of the handle.
Cockspur handles
Cockspur handles can be found on older uPVC or aluminium windows. They do not come with a locking mechanism, but they are considered safe as the handle's nose is closed into a wedge-shaped block that is fitted to the window frame. (This type of handle should not be confused with timber frames that have an opening). Cockspur handles are still popular and there is an array of styles to match the kinds of door.
They are a simple and economical choice and they can be key-locked to satisfy home insurance standards. There's also a selection of handle nose heights that match different frames. A lockable version, which provides a level of security and has been approved by Secured by Design, is also available.
These types of handles are attached to the sash on the tilt-and-turn or casement windows using a spindle that runs through the baseplate. The handle is operated with a lever either side and the handle spindle is connected with a striker wedge fitted to the window frame. Cockspur handle kit are available in both right and left hand versions. There are also a variety of nose heights that fit the majority of frames.
The right wedge block size is essential to a successful installation. It is essentially a small block of plastic designed to look like ramps. You can replace the existing handle with one with a slightly larger size to ensure that the handle closes precisely across the gap of the window, sealing it against draughts. There is some standardisation of the fixing positions for these handles. They are usually 38mm and 58mm, so you should be able to find the correct replacement without too much difficulty.
Another thing to think about when selecting the new set of cockspur handles is the length of the spindle. This is the distance between the handle baseplate and the point where the shaft extends through the sash and into the frame. It is crucial to get this right to ensure that the handles work smoothly.
Turn and tilt handles
Specially designed for tilt and turn window handle loose and turn windows these handles are available as locking, non-locking or tilt safe choice. They are hefty operating handles with a firm grip and detents at 90 degree positions. Available in a variety of finishes, including white, black and gold. Suitable for Timber or PVCu tilt and turn windows.
These handles can replace the cockspurs made of upvc window handles near me on older windows without locks. But, you must be aware that these are distinct from espag upvc handles because they're not locked and work in a different way.
They have a 'turn before tilt' mechanism that allows windows to be opened inwards and then dropped down into a hopper or ventilation style position for fresh air. This kind of handle, sometimes referred to as DK or dry keep window handle is typically employed in older double glazed window handles and locks glazed properties.
There are many things to consider when replacing a tilt and turn window handle. First, you must ensure that the handle you select is compatible with your windows. This includes assessing the spindle size. The spindle is the metal rod that extends from the handle into the locking mechanism. The longer the spindle, the more security it will offer.
The handle itself is usually attached to the frame or the base of your window using a screw located above or below it, depending on the design of the window. The screws can be removed by using a screwdriver and the handle can be removed. It is best to unbolt the handle first, making it easier to reach both screw holes.
After you have removed the handle, you will see two screws that must be removed. These decorative screw caps will be exposed. These can be unscrewed with a flat-head screwdriver before the handles can be removed. After the handles are moved to the windows, you can replace the screw cap.
Take a measurement of the length of the spindle.
The spindle of a window handle determines the way it will open and shut. Different types of handles have varying spindle lengths. It's vital to determine the length of your old handle prior to purchasing a new. This will ensure that the new handle fits the window in the right way and is easy to open and close.
Whether you need a new set of handles or just desire to improve your uPVC windows' appearance, the kind of handle will have a major impact on how windows open and close. There are many different types of handles, such as inline espagnolette, cranked and key locking. There are tilt-turn handles designed to be used with tilt-turn uPVC window that can open both ways.
To replace a window handle first, you must find the screws that secure it. They are usually placed either above or below the handle, and can be removed with the help of a screwdriver. Once the screws are removed, you can take the spindle and handle from the window frame.
Then, remove the handle from the frame of the window and replace it with a new one. Make sure that the new handle is placed in the same place as the old upvc window handles handle and that the spindle is aligned correctly with the lock mechanism. After the new handle is installed, it's time to secure the handle by reinstalling the screws. If you have screws that are missing you can replace them.
It may be necessary to replace the handles on your uPVC window when they break. The handle could break because of a powerful pressure, or the female section which the spindle is placed into may be worn down. The latter can be caused by someone in your household forcing the handle to lock.
The best method to replace your window handle made of uPVC is to get a high quality one that will last a long time. You will save money in the end. It will also give your home an updated and appealing look.