Replacement Upvc Window Handles
Almost all replacement upvc window handles include everything you require to complete the task. However, if the old handle had screws or pins that were holding it, they must be removed. Take off the "snap-in" cover at the base of the handle.
You'll need to identify what type of window double glazing replacement lock and handle you are replacing. This is crucial!
Espag
Espag handles are a multipoint lock system that is fitted to casement windows, such as uPVC and wooden double glazing. They come with a 7mm square spindle which is fitted into the gearbox of the uPVC window. When the handle is turned, it opens an array of locks around the perimeter of the window. Espag handles are also referred to as shootbolt handles. They provide extra security compared to the conventional single point lock used on older window frames.
They are available in a range of different options such as inline and cranked handles that can be used in left or right-hand operation. There are also ergonomic handles that enhance the appearance and feel of your window, as well as the handle.
You will need to measure the size of the spindle from the base of your uPVC handle in order to purchase the correct replacement. This measurement is known as step height and can help you find the perfect uPVC handle for your home.
If you require to remove screws that hold the handle, use a screwdriver or pliers. After this is done then you need to remove the handle from the frame by taking off the screws or pins that secure the spindle, and then pulling it away from the window.
Once the handle is removed, you will then be able to access the locking mechanism inside the frame of the window cost replacement and take out the cockspur wedge block that is fitted adjacent to the handle, allowing the window to open. The new uPVC handles you purchased should be able slide onto the cockspur block before sliding into handle spindle to allow the window to open again. It is recommended to replace the cockspur wedge block with a new one whenever you replace your uPVC handle to ensure it is properly secured.
Cockspur
Cockspur handles are typically found on older uPVC and aluminium windows. The handle is closed and rotates into a wedge-shaped plastic catch. (Not to be confused with timber latches which are also covered in this section.) They can be locked or non-lockable. They come in a range of different nose heights to fit the existing frame.
The handle locks using a small spur (little triangle bit) pulling up against a wedge of plastic that is fixed to the frame. These are usually single-way handles, but a deadlock with a locking mechanism can be added to give additional security.
The replacement cockspur handles are easy to install. All you need is the correct backset and a new set (supplied). The backset is measured from the baseplate to the underside of the nose of the handle. Aluminium window frames are generally 9mm wide, while UPVC is 21mm wide. There are a variety of variations, so it's essential to measure before buying the handle.
This kind of window handle can be substituted by unscrewing the current handle and taking off the spindle, or in some cases the whole handle assembly. The new handle will then be screwed in place using a pair of pozidriv screws. The pozidriv screws are available in a brass or zinc finish to match the hardware. There is also the option of a locking version that self-locks.
This cockspur handle is easy to install and is perfect to replace or repair old uPVC Windows. They are an universal design, making them suitable for all profiles and backsets. Each handle comes with three packers of varying thickness. They are attached to the underside of the handle nose and can be arranged in a variety of ways to achieve backsets of 9-13mm 17mm, 21mm and. The handles are available in both left and right-handed versions and in lockable and nonlockable versions. They also come in a variety of nose heights.
Turn and tilt
The most prestigious European window style of tilt and turn has been around in Europe for a long time, but it is only now starting to gain popularity in the United States. They combine the benefits of three different window styles into one - tilt, pivot, and in-swing. They are ideal for older homes since they provide more ventilation than standard windows.
When tilt and turn windows are closed, they are locked like any other fixed window. However, by turning the handle 90° or 180@ (depending on the kind of tilt and turn window) the sash can be opened upwards and the window will be tilted into allowing air to circulate through the opening at the top of the frame. This is an excellent way to ventilate without opening the large potentially dangerous window.
If the handle is turned another 90or 180 degrees, the sash can be fully opened as doors. This allows full air exchange which is especially useful in draughty rooms or houses where smoke and other odors can accumulate. It also makes cleaning the outside of the glass for windows replacement much simpler as it can be done from inside the house - a task that often requires precarious ladders.
Tilt-and-turn windows seal replacement are also safe. When they are locked in the closed position they are difficult to open from outside, and they have double seals that prevent rainwater from entering the house when they are in the tilted or in-swing position. This feature is especially useful for older homes where burglars tend to target traditional windows that can be opened using side hinges.
Spade
There are several kinds of window handles that can be fitted to double glazed windows made of Upvc. There are two main types of handles: Cockspur and Espag. Other choices include tilt and turn handles, blade or spade handles, monkey tail handles and other types. The type of handle you choose will depend upon your preferences and the kind of windows you have.
You need to know how the handle you have currently is attached to the frame in order to choose the right replacement Sash Windows cost Upvc handle. This is known as handing, and it is an important element to be aware of when shopping online. Some handle variations do not fit all windows. Certain cockspur handles, as an instance, are angled, while others are straight, and can turn left or right. You will also need the spindle's size which is the distance between the base of handle and the head of the handle.
Identifying if your windows need a restrictor is also crucial when selecting the correct handle. They are typically used in high-rise apartments or commercial buildings, but they're not a requirement for the majority of homes. It is also important to take into consideration the step height, which is the distance between the screw plate and the nose of handle.
The word spade originates from Old English spadu, spaedu or spada. It has been translated into a variety of languages including German spaten and Low German spathen. In the Harlem Renaissance of the 1920s in New York City the word spade was used to mock black people. Since then spade has become an emblem of African American pride and heritage.
When replacing a Cadenza style handle, it's essential that you get the right size. The handles are available in straight and angled versions that differ by just a few millimetres. The handle head may be shaped in a D or a T shape, or have no handles at all.