Making Your Own replacement key for saab 93 (image source) Viggen
saab ignition key owners who lose a key may worry about the cost and hassle of replacing it. However, there is a way to cut down on these expenses by making your own key fob.
To accomplish this, you'll need the flathead screwdriver. Place the screwdriver in the slot that is located in the middle of the case, and slowly open it.
Cost
The majority of SAABs have two keys when new, however certain used vehicles only have one. In this situation the owner has to purchase a new key, and it can be expensive. There are a variety of options to cut costs in this process. For example, if you simply require a new key fob case and you want to save money by purchasing a used case at an auto dealer. These cases do not include the emergency badge or key, and are prone to wear out fast.
It is also necessary to pay for the installation and programming of the TWICE module. These costs can be expensive particularly if you do not have a spare.
It is essential that you always have at least two keys to your car. If you lose your primary key, you won't be in a position to get transportation.
It's not as hard as it may seem to add an additional key from the Saab 9-3. The only issue is that you must pair the key with the car's computers. This can be accomplished by a dealer but it might take some time to make an appointment. You can find all the info you need on the internet to help you through the process.
Installation
The majority of Saab vehicles built after 1995 come with a special immobilizer system that makes use of keys to control the car's engine. This system also controls door locks as well as remote functions of the vehicle. It is important to have a spare key to avoid losing the original one and causing your car to be stolen. The good news is that if you lose your sole working saab 93 key fob key you can get it replaced without the need to pay for an expensive dealer service.
You must first prepare the new keyfob. To do this, you will need a flathead screwdriver to open the case. Insert the screwdriver into the tiny slot that is located in the center of the case, then gently move the screwdriver. If you're having trouble, try using different angles. After you've opened the case, you'll be able to take out the electronics and put them in a brand new fob case.
You can begin programming after you have the replacement key and fob. You'll be required to connect your Tech2 and follow the steps for the NG 9-3 (with or without a key). It is recommended to use a replacement unit that is fitted with the correct transponder and key. You can find the unit online, but you should make sure that the replacement is an OEM part.
Programming
Tech 2 Tech 2 is required to add an additional key to the Saab 9-3. It also requires programming the vehicle to recognize the new key. This is a more complex procedure than simply copying a metal key. It must be carried out by professionals to avoid damaging the electronic system of the vehicle. It's best to add a spare car key as soon as you can. In the event of delay, it could result in higher costs in the future.
You'll also have to replace either the TWICE or CIM modules. This is typically a mail-order process and isn't something you can get through an aftermarket vendor. The cost of purchasing a new car can be very high depending on the model.
There's a solution to the dealer that is charging you the highest dollar to replace the car computer. S.A. Locksmith & Security can re-program the embedded memory in your Saab computer and prepare the vehicle for the new key, saving you the cost of a brand new car computer! This service is quick, simple and affordable. You will save as much as 50% of what the dealer would charge. This is a great option for those who have lost saab keys their keys.
Remotes
The Saab 9-3 Viggen was among the most distinctive vehicles that ever wore the saab centre milton keynes badge. It was an Scandinavian front-drive fighter jet-inspired monster that was both fast and enjoyable to drive. Many other Saab models were released, but none were as original.
It is essential to change your saab key code 9-3 key fob in the event that you lose it. Unlike the more common European hot hatchbacks, Saab vehicles come with an immobilizer system that requires a special key to activate. The replacement process is relatively easy if you've got a spare key, however it could be costly and lengthy if you don't have a spare.
You can save money by buying a used replacement key fob and having it programmed by a local locksmith. However, you should be cautious when purchasing used keys on eBay and other online outlets. They might not be authentic, and you could end up paying more in the end.
Removing the electronics and battery from the old key fob is a simple procedure that anyone can perform with a simple screwdriver. Be careful not to damage any of the small electronic components in the case. Avoid pouring liquids into the case as this can cause damage. Avoid buying duplicate keys from aftermarket sellers, since they might not have been connected to the CIM on your car.