How to Replace a Saab 9-3 Key
The Saab 9-3 has a good amount of appeal for drivers. It has a powerful engine and excellent visibility. It has a high safety rating.
However, it is important to make sure that you have at the very least two keys that work for your vehicle. It is costly to replace a key if you lose it.
How to replace the ignition Key in the Saab9-3
You have to replace your car keys when it doesn't turn. This guide will guide you through the steps to do it on the Saab 9-3. You will need to replace the key, purchase a new reprogrammable cell, and buy a new case for your key-fob.
Unlike older models, most modern Saab cars use a transponder in the key-fob instead of a physical key to unlock and start the vehicle. The issue with this is that the reprogrammable battery on the key-fob can wear out and will not hold a charge for any longer. This is particularly when you keep using the same key on the same lock.
A professional locksmith can change the battery quickly. You can also do it yourself if you have the necessary tools and a little bit of patience. The first step involves separating the key-fob. This is done by inserting a flathead screwdriver into the slot that is located in the middle of the case. It is important to work slowly, as the plastic is thin and easily damaged.
After the case has been opened, you can prepare the new key by combining the lower section of the key that was used previously with the transponder and banana on the new key. This will ensure that the new key is properly mated to your CIM and can make a significant difference when replacing the sole key on your saab ignition key 9-3.
How do I replace the ignition Key in a Saab 900
Unless you have two keys, you will have to take off the dashboard and steering wheel to gain access to the ignition. Start by disconnecting your negative battery cable. Once the battery is disconnected, it is possible to remove the trim and dashboard pieces that surround the steering wheel. Once the dashboard is removed, you can put an opening with a screwdriver behind the ignition switch.
The ignition cylinder is equipped with key locks that can stop the vehicle from starting if key isn't present in the. If the ignition switch on your 900 isn't functioning properly, check to see whether the key is inside the lock or within the ignition barrel. It's also a good idea to rotate your keys frequently and clean them regularly so that they don't get bent.
Saab cars are different from other cars in the sense that they don't make use of traditional keys made of metal. Instead, the car detects electric signals from the key fob through an specialized microchip inside.
If you lose just one working key fob, your dealer will charge you the cost of replacing your computer module (also called the CIM). We can reprogram the EEPROM on your computer to enable it to accept new keys without the need for replacement. This will save you up to 50% of the price the dealer charges! We call it the saab 9-3 key fob programming (scott-tarp.federatedjournals.com) Key PROGRAM. Find out more about it here!
How to Replace the Ignition Key on a saab 93 key 9-5
The metal part of a traditional Saab key is easy to copy, and also not much of a barrier against theft of vehicles. The electronic part of the key-fob has an electronic chip that detects the car when the key is put in the ignition switch.
saab replacement key programming's anti-theft system has been relying on this technology for over a decade. It's not as effective as a physical lock for your door but it does make stealing your car a lot more difficult. This is why every Saab owner should keep an extra key on hand.
The majority of new Saabs are delivered with two keys. However, they can be added at an dealer by using a handheld device, called a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is the NG 9-3 vehicles which are more modern and newer features that require an ignition key.
The dealer will replace the CIM or TWICE module of those vehicles if all keys have been lost, and charge you top dollar for this. We can reprogram your computer's EEPROM to accept new keys without having to replace expensive modules.
How to Replace the Ignition Key on an XC90 Saab
It's probably time to replace your saab keys key fob if it is experiencing issues turning the barrel of your lock. It's a simple process and you don't need to visit a dealership. You can complete the process at home, using a couple of simple tools.
In the beginning, you'll need to prepare the new key. Before you start, disable the anti-theft feature by placing blocks underneath your rear wheels, and then releasing your handbrake. Then, you can insert the key into the ignition and turn it to the on position that activates the accessories, but doesn't start the engine. Repeat this process five times and leave the key in the on position.
You'll need to purchase an additional case for your key fob. You can find them at any auto parts store, and they're typically quite affordable. You can buy them with or without electronics, depending on the model.
To open up the case, place a flathead screwdriver in the slot in the middle and gently work it. The case should break easily, and once you do, you'll have access to the internal electronics. To get rid of the electronics, employ a small screwdriver and try to pry them out with a gentle force.