Repairs to uPVC Windows
uPVC is a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. They don't decay or rust as timber and aluminum.
Cleaning and lubricating regularly UPVC windows and doors is crucial. This will prevent unnecessary repair costs and improve energy efficiency.
1. Broken Glass
The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is important to take the time to ensure that you're doing all you can to keep your windows in good condition.
Single-pane windows are fairly simple to replace and will usually fit into the old frames very easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this situation you'll need to source some plastic spacers that will assist the new pane to fit properly into the window frame.
Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes so that any shards fall on the fabric, not onto the floor which could cause them to be trampled under.
It's a great idea to tape the gap once the glass has been removed. This will stop water and drafts from entering your property until a professional is able to repair the window. It also acts as a barrier to prevent any intruders from making their way into your home. If the gap is particularly large, you may think about an alarm door that comes with an integrated window, as it offers the best of both worlds.
2. Sagging
Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. However, over time, they can suffer from a variety of issues, including sliding. A sagging window repair in uPVC could cause issues with light, draughts, and even security. It is crucial to act as soon as you realize that your uPVC windows are sagging.
To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to unblock the windows to access the frame. You can then unscrew both the top and bottom hinges with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after you have moved your hinges. If you're satisfied with the fit, tighten the screws to ensure they stay in place.
If you cannot reposition the hinges, you might have to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loose their elasticity. It is important to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.
uPVC handles could also become loose. This is typically caused by screws that have been removed over time, but it could be due to the handle mechanism wearing out. It's fairly simple to repair a loose uPVC handle. First, you'll need to shut the window and do an initial fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't you can use a screwdriver to loosen up the handle. Then turn the mechanism into position.
3. Water Leaks
It is essential to act if you get up each morning to find a smoky wall and wet floors. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.
This is a simple fix that can be completed by anyone who is a DIYer with the skills. Depending on how serious the issue is, the old caulking may need to be removed. It is essential to keep in mind that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and could decrease the efficiency of your energy usage.
Make sure that the drainage holes have no debris inside them and ensure that the sill pan is angled correctly to drain away from the window repairs near me. In more serious cases you might need to consider replacing the window repair.
Mold spots and rotten sills are other signs of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the home.
If the leakage is occurring between the double glazed window repairs near me-glazed window, it is more likely the problem is with the seal rather than the frame. Again this can easily be fixed by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
Hinges could be at fault when your upvc window repairs window is difficult to open or it opens with the breeze. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.
Most households in the UK will have top-hung or side-hung uPVC windows that have hinges and like any mechanical part they will wear out over time. It is very easy to change the hinges on a window but it's much easier if someone else helps hold the frame.
It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.
The issue could be caused due to opening the window in the wrong way or due to a poor installation at the factory. Sending us a photo via our website is often enough to resolve the problem. We are happy to offer suggestions.
It is also crucial to lubricate the hinges on a regular basis. Applying a light engineering lubricant on the hinges is a good method to accomplish this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. It is recommended to do this at least once a year. WD40 and other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.
5. Draughts
Draughts in windows made of upvc can be caused by a few different things. The hinges can also become disaligned as a result of wear, causing gaps where the sash meets frame. If they're beyond repair, it might be necessary to have them realigned. In addition, the interlock could be misaligned. This is located on the hinge's side, and could require to be cleaned. In some cases it is possible to replace them.
The second most frequent cause of draughts is the window seals. They are susceptible to being worn out or damaged over time and allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures and again will reduce draughts.
The last way to reduce the amount of draughts is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler that can be put on top of your window sill. They can help stop cold air from entering and keep your home warm and cozy!
With a little regular maintenance and repairs your windows made of upvc will continue to provide an excellent level of security and insulation for your home. It is essential to remember that all windows will eventually get worn out and it could be more cost-effective to replace them than to repair them. If you are experiencing issues with your window made of upvc you should consult an expert as soon as you can.