Guide To Upvc Window Replacement Hinges: The Intermediate Guide Towards Upvc Window Replacement Hinges

Choosing Upvc Window Replacement Hinges

It's not as difficult as it might appear to select and install the replacement hinges made of upvc. It is essential to verify that the arrow on the hinges are facing in the correct direction and also the thickness (13mm or 17mm) of the hinge arm that is on the opening frame.

There are several kinds of hinges to pick from, each with unique features. This article will review the most popular types of uPVC window hinges, and their benefits.

Egress/Easy Clean Hinge

These are a great choice for replacing or upgrading your fire escape window as they open to a full 90-degree angle. They can also be lowered into an 'easy clean' position to allow you to easily access the exterior of casement windows hinges to clean them without climbing an overhang or climb a ladder at potentially hazardous angles.

These egress hinges are heavy-duty and are made by Yale which is among the most well-known and trusted home security brands on the market today. These hinges can be used with any kind of uPVC side-hung window. They can be moved to the clean position by pressing the small button and sliding the window sash to one side. When the window is closed, the sash will return to its original position.

They are available in 13mm and 17mm stack heights. Depending on the size of your window, we suggest using our Egress Selection Guide to determine the best product for you.

The hinges are designed to be used in conjunction with a standard side-hung frame which is made of aluminum or uPVC. They are equipped with an easy friction screw that can adjust the amount of resistance that is generated. This makes opening the window easier and reduces the chances of accidental closing during high winds. They have been tested for over 30,000 cycles, and comply with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.

The Nico Egress Easy Clean friction hinge is simple to use and has no buttons or catch. It is a simple and safe option for emergency exits and cleaning. Press the hinge retention clip located in the inner corner of the bottom corner. This will open the bottom and top catches and allow you to move the sash into an easy-clean position. Close the window when you are in the easy-cleaning position. This will set the hinges back to their exit positions.

Fire-Escape Hinge

Fire Escape Hinges (also known as "Easy Clean") are used to replace windows with side openings for fire safety reasons. These types of hinges are more spacious and more efficient than conventional hinges to provide an expansive clear opening to escape in the case of a fire. This kind of hinge is legal in any habitable room that has a window, as required by building regulations.

They feature an exclusive friction stopper that opens the window to a 90 degree angle and allows the opening sash to slide across when open to allow easy cleaning of the exterior side of the glass without needing to climb ladders. The hinges aren't flimsy buttons or catches, and are operated by a simple, safe lever that can be accessed from the inside of the home.

The hinges are produced in the UK by Cotswold and come complete with a child safety restrictor for day to day use which can be turned off by a hidden button, giving you peace of thought that your children won't accidentally open the door too far. The stack heights are 13mm or 17mm.

To order these hinges, simply take a measurement of the length of your existing side-hung window hinge that attaches to the frame (see the guide on measuring the length of your window hinges made of upvc). Choose the right size hinge from the list below.

Be aware that the measurement is taken from the part that fixes to the frame and not the sash. The actual hinge length could be longer or shorter depending on the manufacture of your old windows. When deciding on the width of the hinge most frames made of upvc will have with a height of 13mm however if your original window frame has 17mm, then select this option. You can also opt for the 4mm packer in order to compensate for the difference. All hinges are in two different directions (1 left and one right). The hinges do not come with screws. They can be purchased separately if required. We recommend using our Upvc window hinge repair screws. They are specifically designed to improve the performance of your hinges, allowing them to operate smoothly for a longer time. They feature a less friction design and a better weather seal that is fitted with a new nylon reducer cap.

Restricted Hinge

There are instances when a window hinge fix needs to fully open and this can be a problem using the standard hinge. The restricted child safety friction hinges help to overcome this problem and offer a fantastic solution when ventilation is needed but access for cleaning or escape in case of fire is not possible. They restrict the amount of opening the sash, and allow overriding this restriction by pressing the button. They are available in 13mm and 17mm stack heights. They can be used for top and side-hung windows.

The Nico Restricted Egress Friction Hinge blends the advantages of a standard restrictor and an escape hinge to offer an effective and simple way to meet building regulations. It is available in 13mm and 17mm stack heights and can be used for the top and side openings of uPVC window. It is supplied as a pair where one hinge is restricted egress and the other unrestricted allowing one of these to be placed to the bottom of the sash while the other hinge is installed to the top.

These uPVC hinges are specifically designed to be used on casement windows hinges that aren't able to be fully opened, like the bedroom of a child. The mechanism restricts the amount the sash can open to 100mm for safety and re-engages when the window is closed.

As with the other types of uPVC friction hinges, these can be used on any type of window and are ideal for those difficult to access windows above the ground level, three-storey flats or those that typically require a ladder to access them. They can be upgraded with our range security features, including hinge guards and protection plates for the hinge or dog bolts, to achieve PAS 24 performance.

It is essential to measure the hinge on your current window to ensure that you get replacements that are the same size. The easiest way to do this is by viewing the hinge in the gallery and determining the best place for it to be. The top-hung hinges can only be placed on one side, while the side hung hinges can only be positioned on one side.

Standard Hinge

A standard hinge is made of metal-to-metal contact and no extra parts to reduce friction. It comes in a variety of finishes and also has an NFPA-certified fire rating. To quickly determine the radius of a hinge, lay it out flat and place a quarter and dime in two corners. If the dime fits better, the corner is rounded by 1/4 inch. If the quarter fits better, it's rounded to 5/8 inch.

The right hinge can make or break the appearance of your door. Matching the style tilt and turn windows hinges finish of your hinges with your door will create an attractive and well-integrated appearance.