Replacing Double Glazed Window Handle
Replacing a double glazed window handle is fairly simple when you follow the proper steps. You must first identify the type of handle and measure the spindle.
Cockspur handles are still used in older uPVC windows, but they have a different height of step to the aluminum equivalent (also known as spade handles). This means they require an extended spindle.
Measure the Spindle
When replacing a handle in double-glazed windows, it is crucial to measure the spindle to ensure you get the right replacement. Spindle length is the amount the handle extends from the base plate, or how deep it is into the lock. It can differ from handle to handle. When measuring the spindle length it is essential that the old handle is not removed, as you may be unable to get a good reading in this case.
In general you can expect a new handle to have the spindle that fits into it. The dimensions of the spinning will vary between manufacturers and handles, so it's important to verify before buying. Ideally, you should purchase the handle and spindle in tandem to reduce time and effort.
Espag handles are the most common type of handle used in uPVC windows. They operate an internal locking mechanism hidden within the frame that allows them to open and close. They are available in various styles and colors to match your home. When you are choosing an Espag handle for your home, you should pay attention to the spindle's size since it can affect the security of windows.
The handles can be turned to the left or right based on your preference. They are also available in a variety of sizes to fit a large variety of frames. They are an easy and effective option for double-glazed windows.
The tilt and turn window handle is a very common handle. They are typically heavy and strong, as they are designed to lock in two locations when opening the window. They are available in various finishes including chrome and stainless steel. They can also be made from white uPVC or brass to match ironmongery that is already in use.
The Cockspur handle is a traditional window handle with an elongated spur which pushes against the wedge of the frame. They are a straightforward and efficient choice for your double glazed window and are available in a broad variety of nib and nose heights to accommodate a wide range of profiles.
Remove the Handle
There are several different types of double glazed window handles that can be fitted to uPVC windows. The most popular type is Espag handles, which are equipped with a spindle that runs through them and engages with the locking window handles mechanism of the window frame. Other handles include tilt-and turn handles that let you tilt the window to allow for ventilation or turn it completely open. These handles tend to be heavier and come with more complicated mechanisms. However, they also provide greater security. Certain styles of handles can be used with a key lock, which can provide additional security for your home.
Before you can replace the window handle it is essential to check the condition of the handle itself. This will allow you to determine whether it is necessary to replace the handle or if the handle is just needing to be tightened or replaced. If the handle is damaged, it needs to be replaced.
If the handle is loose, it may be necessary to tighten or retighten. Locate the screws in the handle with the help of a screwdriver, and remove them. Make sure that you don't employ a power tool since this could damage the window frame as well as the handle. After the screws have been removed put them aside in a secure location.
Once the handle has been removed from the window frame you can remove it and replace it with the new handle. Start by aligning the new handle with the holes in the window frame. Once you're satisfied with the alignment, you can screw into the new handle.
After you are done testing your newly-installed window handle by closing and opening the window several times to ensure that it is working as intended. If you notice any looseness or wobbling, it is crucial to tighten the screw, as this can cause the window handle to become unstable and potentially fall off.
If you're in search of a replacement window handle, we have a wide range of options available in black, white uPVC, chrome, brass and stainless steel. We carry espag, inline, cranked and tilt and turn handles for all kinds of uPVC or timber windows. We also offer slimline handles that can be adapted to meet your requirements. This is ideal for those who are concerned about space.
Take the Screws off
You will need to remove the plastic covers that cover the screws on the window handle prior to being able to install new handles. You can remove them using a screwdriver, or even your fingernail. They are usually located below and above the handle in its open position. Be sure to not damage any of the screws while removing them, and if possible, keep the caps in case they are needed in the future during the installation process.
Depending on what you need, there are a variety of options for the handle type that you replace. For instance, if seeking something more sleek than the standard handle, slimline models can be ideal. These are designed to accommodate the same spindle dimensions as standard handles, however they are smaller and won't interfere with shutters or blinds. There are chrome, stainless steel, and brass options available, that can be used to match other ironmongery pieces in your home.
After you have removed the handle, you are able to begin making your replacement. You will need to identify the type of handle you have and measure the length of the spindle, prior to making a decision on the replacement. You will need to ensure that the new handle is suitable size for your uPVC windows and that the screw holes align with your existing holes.
When you're ready for installing the new handle, you'll need to ensure that it's in the open position and that the spindle is properly positioned. Place the holes on the handle with the hole in the window, and then install the screws or pins. Be cautious not to over-tighten them, as this may cause the window frame crack.
Once the new handle is installed, you will be required to test it by turning it to lock and unlock the window. It is recommended to do this several times to make sure that everything functions properly, and to check for any problems with the locking mechanism. If you are satisfied with the performance of the new wood window handle handle you can replace screw caps and replace the cover.
Fit the New Handle
A upvc window handle stuck in closed position window handle is typically designed to last for many years, but it can become damaged and require replacement. If the handle is loosened because of a pin or screw that is loose, or it has broken window handle replacement completely from the bottom of the window, it is essential that you identify the cause of the damage before you decide on the best method of repair.
In the majority of cases the window handle that is loose must be tightened before it can be fixed. This will require removing the handle to locate the screws that secure it. The screws are usually concealed on the inside of the handle. However they can be located with a screwdriver. After these are removed, the handle will be removed from the spindle.
After the handle that was used is removed, you are able to replace the new one. It's a simple procedure, but you must be sure that the screws are securely seated. The handle must be positioned properly, and then locked in place.
There are various types of handles depending on the size and type of your window. Cockspur handles are available, as are tilt and turn handles as well as Espag locks. Each has its own specific features and it is crucial to ensure that you're using the correct handle for your window.
If you are replacing a Cadenza handle, for example, then it is important to make sure that you use the same handle with respect to blade design and fixing centres. If you are using an angled blade handle when a flat blade should be used, the blade will break.
Replacing a double-glazed window handle can be a relatively simple process. It is crucial to be aware of the various sizes and styles of uPVC window handles, so it is essential that you measure the spindle before purchasing an alternative handle. If you follow these steps you will be able to fit the replacement handle in no time.