replacing double glazed window handle (squareblogs.net)
If you follow the right steps following the correct steps, replacing a double-glazed window handle should be relatively simple. First, you must identify the type of handle that is in place and measure the spindle.
Cockspur handles are still used in older uPVC windows, however they have a different height of step in comparison to aluminum counterparts (also known as spade handles). This means they require a spindle that is longer.
Take a measurement of the Spindle
When replacing a handle in double-glazed window, it's crucial to measure the spindle in order to ensure that you receive the right replacement. Spindle length is the distance the handle extends from the base plate, or the depth it goes into the lock. It varies from handle to handle. When measuring the spindle length it is important that the handle used previously has not been removed as you may be unable to get a precise reading if this is the case.
In general, it is expected that a new handle will have the spinning component. You'll find the size of the spinning will differ between manufacturers and handles therefore it is important to check before purchasing. To save time and energy, it's best to purchase the spindle as well as handle together.
Espag handles are typically the most popular kind of handle found in uPVC windows and they operate with a locking mechanism that is concealed inside the frame to allow you to allow them to be closed and opened. They are available in a variety of colours and styles to suit your home. When selecting an Espag handle for your home, be aware of the spindle's size since it will affect the security of windows.
The handles are available in various sizes and can be rotated left or right, depending on your preference. They are a simple and effective option for double-glazed windows.
The tilt and turn window handle is a common handle. These handles are usually big and durable, since they lock in two different locations when opening windows. They are available in a variety of finishes, including chrome, stainless steel brass, white uPVC to match the ironmongery you already have.
The Cockspur handle is more of a traditional window handle that has an elongated spur which pushes against the frame's wedge. They are a straightforward and efficient choice for your double glazed window, and come in a variety of nib and nose heights to fit a wide variety of profiles.
Take the handle off
There are a variety of different kinds of double-glazed window handles that are suitable for uPVC windows. The most commonly used type is Espag handles, which have spindles that run through them and connects to the locking mechanism of the window frame. Other kinds of handles include tilt and turn handles, which allow you to either tilt the window open to get ventilation or fully open. They are typically heavier and tend to have more complicated mechanisms, but they also offer greater security. Certain handle styles can be used with a key lock which provides additional security for your home.
Before you can replace a window handle, it is important to assess the condition of the handle itself. This will help you determine whether it is necessary to replace the handle or if the existing handle is just needing to be tightened or replaced. If the handle is damaged, it needs to be replaced.
If the handle is loose, it might be necessary to tighten it or retighten. Utilizing a screwdriver to locate the screws in the handle and remove them. Be careful not to use a power-tool as it could cause damage to the window frame, or the handle. Once the screws are removed put them aside in a safe location.
Once the handle has been removed from the window frame, you are able to remove the handle from the frame and replace it with a brand new one. Begin by aligning the new handle with the holes in the window frame. Once you are happy that they are lined up place the new handle and screw it into place.
After you are done, test your newly installed window handle by opening and closing the window several times to verify that it is working as intended. It is essential to tighten the screw in the event of any looseness or wobbling. This can cause the handle to become unstable, or even drop off.
If you're looking for a replacement window handle, we have a variety of options in white uPVC, black, chrome, brass and stainless steel. We have espag, inline, cranked and tilt and turn handles for all kinds of uPVC wood window handle and aluminium windows. Depending on your requirements we also offer slimline handles that reduce the overall size of your handles which is great if space is a concern.
Take off the Screws
The screws of window handles are typically covered with plastic screws that you'll have to remove before installing the new handles. They are usually located just above and below the handle when it is in its open position and you can remove them off with either a screwdriver or fingernail. Make sure you don't lose any screws while removing the caps.
Depending on the requirements of yours, there are various options for the type of handle you want to replace. If you're looking for something more sleek than the standard handle, slimline models may be perfect for you. These handles are designed to fit on the same spindle as standard handles, but are smaller and won't impede blinds or shutters. There are also chrome, stainless steel, and brass options available, that can be used to match other ironmongery pieces in your home.
After you've removed the handle, you can start making your replacement. Before you decide on the replacement, you'll need to determine the type of handle that you currently have and determine the length of its spindle. You will need the new handle to be of the right size for your uPVC window, and the screw holes should match your existing holes.
When you're ready to install the new handle, you'll need to make sure that it is in the open position and that the spindle is correctly positioned. Line up the holes on the handle with the holes in the window, and then install the screws or pins. Be careful not to over-tighten them, as this could cause the window frame to crack.
You'll have to test the handle by locking and unlocking the window handle stiff to close. It is recommended to do this repeatedly to make sure that the window lock functions and to check if there are any problems. If you are satisfied with the performance of your new window handle you can replace the caps on the screws and put the cover back on.
Fit the New Handle
A uPVC window handle is typically expected to last for a long time however, it could be damaged and need replacement. It is essential to determine the source of damage before deciding on the next step.
In most cases, a handle that is loose on a window needs to be tightened to fix it. This will involve removing the handle and finding the fixing screws which hold it in place. These screws are usually concealed on the inside of the handle. However, they can easily be found using the help of a screwdriver. Once these are removed, you can remove the spindle from the handle.
After the handle that was used is removed, you can then replace the new handle. It's a simple procedure but you should take care to make sure that the screws are securely in place. The handle must be positioned correctly, and then secured.
There are a variety of handles based on the type and size of your window. Cockspur handles are available, as well as tilt and turn handles and Espag locks. Each has its own characteristics, so you have to make sure that you select the right handle for your window.
If you are replacing the handle of a Cadenza handle, for instance it is essential to ensure that you use the same handle in terms of blade design and fixing centres. If you are using an blade handle with an angle when a flat blade should be employed, the blade could break.
Replacing the double-glazed window handle could be relatively easy. However, it is important to keep in mind that there are various sizes and styles of uPVC window handles, so it is vital to take measurements of the spindle prior to purchasing the replacement handle. By following the steps outlined above, you should be able to fit the new handle in no time at all.