Sash Lock Door Handles
If you want to enhance the security of your home, without compromising aesthetics, go for sash lock door handles. They are used in conjunction with a mortice latch or timber sash window lock and can be paired with a night latch to provide additional security for doors that are internal.
These handles are an amalgamation of the lever and the handle that is mounted on the backplate. They are compatible with three or five-lever mortice locks. They can be paired with tubes latches.
Lever Lock Handles
There are a variety of lever door handles to complement any decor. Rustic lever handles work well with rustic or ranch-style decor and are also popular in modern homes. Classic lever handles can be circular or spherical, and are easy to grasp. They are simple and affordable and can be incorporated in any decor. To create a chic style, choose a polished chrome or satin nickel handle. These finishes are robust and easy to clean. Antique bronze and polished Brass are also choices. A majority of levers have a unique design, such as small amber worm eyes or long-horned crystals. Some levers feature pins, stars or other shape molded in the bottom.
To replace window sashes the lever lock door handles first make sure you have the correct screwdriver or tool to disassemble them. Depending on the design and model you may need to make use of an awl or nail to remove the lever handle. Some lever handles have a small notch or hole on the opposite side of the base which can be used to break it open.
Once you have the right tool, follow the manufacturer's instructions to take off your old handles. You'll need to verify the spindle size of your new lever handle. Doors from the past may have been morticed for previous latches and locks, that require a particular spindle. Most lever handle manufacturers offer a standardized door spindle size for handle.
If you wish to replace a sash lock door handle, take off the old handle and disconnect the tubular latch bolt from the strike plate on the door frame. The latch bolt needs to be put through an opening in the frame of the door and then connected to the strike plate.
When installing a new lever door handle it is important to note that all ADA (Americans with Disabilities Act) compatible handles are designed to be operated by hand and should not require the user to tightly grip or turn their wrists. To be in compliance with ADA compliance standards, the lever door handle cannot be operated using the thumb and finger, or even the entire hand.
Sash Lock Handles
The main function of sash lock door handles is to pull the sashes that are moving together to form a seal. This helps maintain the interior temperature of the house and also prevents drafts. These locks are great for doors without the need for a keyed lock system.
Sash locks are sometimes called mortice sashlocks. They incorporate a latch and dead bolt into a case that is fitted in the material of a door. They are often used in conjunction with door handles and are available with a wide range of options.
The lever lock handle is operated by a lever that has an opening in the backplate below. This allows a key inserted into the mortice sash to operate it. This lock is typically used on doors that do not lock, like those in dining and living rooms. However it is also possible to use with a tubular lock for an extra secure door.
These are designed to keep the sash together at multiple points, and have a hook that fits inside the keeper. They are available in various styles and designs that are suitable for different types of windows like sliding or hinged casement window sash windows. Some are made of cast aluminium while others are made of brass or iron. They are available in a variety of finishes to complement other components of your door furniture, such as escutcheon plates that secure the keyhole.
3 lever sash locks are suitable for internal doors however they are not suitable for external doors since they don't provide the level of security required by insurance providers. They are also less resistant to forced entry than their five lever counterparts, which makes them more vulnerable to attack.
A door sash lock with five levers is a better option for external doors because it provides greater levels of resistance to forced entry and is more difficult to bypass or pick. These locks feature an upgraded design that has been tested and certified to comply with strict security, fire and disability regulations.
The first step to replacing the handle of a sash lock is to remove the old fastener by removing the screws from both ends. Make sure you have a screwdriver handy, and carefully separate the parts to prevent damage. Mark the screw holes using pencil to ensure that you ensure that the new fastener is properly aligned when you are ready to install it. Remove any dust or flickers of paint before screwing the new fastener in. Test the handle to ensure it functions properly and creates an airtight seal.
Tubular Latch Handles
The tubular latch is a latch mechanism which sits inside a door and is operated by turning the handle. It is designed to shut a door but it does not lock it like mortices. They are typically used on doors that are internal and there is no requirement for locking. They can be equipped with lever handles or knobs.
Tubular latches are available in different sizes. The sizes range from the economy to the high-end architectural. The size you select will depend on the usage of the door as well as whether you require the function of a lock. If you require a thumbturn release mechanism for an emergency situation, then it is necessary to have a lockable latch.
The backset of your door will also determine the latch you select. You will need to choose a latch that has an backset measurement that is in line with the distance between the edge and the centre of your door's hole for the handle rose or knob. This will ensure that your knobs and handles can operate the latch smoothly.
If you are fitting a sprung or unsprung door knob or lever, then it is important to choose a durable tubular latch that has a double glazed sash windows cost sprung follower and tongue. This will provide an easy operation for the latch and stop it from becoming sluggish and inactive after regular use.
The next step is to put the latch onto the door. The first step is to ensure that the latch is level to the top of your door frame/casing. Then mark the location of the plate and drill holes. Countersink drill bits can help create the correct recess that allows it to fit comfortably.
Once the latch is in place Once it is in place, you can screw it to the door. Before installing your locks or handles it is essential to make sure that the latch functions correctly. To check this you need to open and close the door a few times. If it's not working correctly try lubricating your door with WD40. Then try it again. If you continue to experience problems then it might be necessary to consult a locksmith or a professional installer.
Keyhole Handles
Keyhole handles work with a tubular latch placed inside the door to allow it to be closed and opened it. The handle engages the latch when it is pushed down, and releases it when pulled up. These types of handles are most often used on internal doors such as living rooms and dining room doors but can also be fitted to front doors if they are paired with the nightlatch.
Door knobs are a more contemporary type of handle that incorporates a sprung lever/handle on a round or square fixing rose, with a matching thumb turn or escutcheon. They are available in a broad range of styles and finishes to fit different doors around the home. They can be used with Euro cylinders or multipoint locking systems to provide added security. This is achieved through several points of locking along the door's height and requires doors with handles that are compatible and have the correct lock centre dimension to fit the barrel of the cylinder.
A keyhole escutcheon is an escutcheon that covers the door's existing keyhole that hides it from view and give a more stylish appearance to the handle. They come in both an open or screw on design and are available in a variety of finishes to match the door handle. A recessed escutcheon, which is attached to the outside of the door to hide the keyhole further and give it a modern look, can also be utilized.
Most of the handles discussed above are designed to work with either a mortice lock or the sash window cost lock mechanism. However some are compatible with Euro cylinder locks too. These locks are installed on uPVC doors and require compatible door handles with a Euro cutout for a cylinder and the appropriate screw holes in the backplate to accommodate the euro cylinder. These handles might also require an escutcheon for Euro-cylinders, or a standard escutcheon according to the use.
It is important to understand the distinctions between a sash or mortice lock and a tubular latch, as well as the compatibility requirements for each. You'll need to consider the thickness of your door and door hinges, as well as frame reinforcements as well as the backplate of the door handle size, lock centre dimensions and the screw centres for the cylinder.