Door Lock Replacement - What Are the Different Parts of a Door Lock?
Faulty door locks could make your home an easy target for burglars. Change your locks is a cost-effective method to increase security without making your door unusable.
Many locks come with a cardboard template you can wrap around your door edge to ensure it fits properly. This will help you avoid buying the wrong lock.
The Cylinder
The cylinder, also known as the body of the lock, is the most important component of a traditional mechanical door lock. It is made up of a set of spring-loaded pins that hold the door shut in the event that no key is inserted in the hole. When a key is put in, the uneven edge of the knob pulls the pins of the cylinder into their proper place. Once the pins are in position, they allow the bolt (also called the latch) to move forward, contacting the inside of your doors.
The bolt extends from the cylinder to an opening in your door frame that is called the box. The box is designed in a way that the bolt can't be easily removed. The bolt is retracted by a clip spring once the door closes. When you turn the handle the spindle is designed to rotate inside the cylinder. The slanted end retracts into the frame of the door once the spindle is finished rotating. The bolt is positioned in the carved-out portion of your doorframe, securing the door closed until you need to open it again.
A faceplate is a metal plate that is attached to the inside of your door, either side of the deadbolt hole. Its purpose is to safeguard your locking mechanism from damage that could result from the repeated removal and insertion of your knob. If you're installing an entirely new lock, make sure the faceplate aligns with the hole in the door frame, and that it's securely fastened to the plate as well as the bore of your latch.
When replacing locks on doors make sure that the deadbolt is seated correctly by sliding it into the the strike plate. After you're done, screw the strike plate and the core of your new lock into the hole. Be careful not to over-tighten because this could damage the latch and prevent it from fitting into its groove properly. You can test your new lock by turning the key with the lock in the locked position. If you find any issues, such as a noisy deadbolt or an unfastened latch It's best to replace the lock with a brand new one.
The Faceplate
A faceplate is an over-sized flat plate that attaches to the headstock of the lathe to hold the workpiece. The screw thread is inserted into the wood using several screw holes. Faceplates can accommodate a wide variety of shapes, but in general they have to be positioned, fixed and balanced that aren't simple tasks when compared to the ease of using an chuck.
A typical faceplate is fitted with mounting holes. In this case three holes are located at 120 degrees to receive the screws for mounting in FIGURE. 2. These screw holes are machined either through an interchangeable insert 16 or directly into the faceplate body. The faceplate features an area of stepped in the middle, which serves as an index mark to indicate a specific location on the blank workpiece.
The stepping area has also been designed to be abrasion-resistant so that the fastener will not harm the chisel that you use to cut it. The faceplate's body has different properties from the surrounding area. The cutting of this area will alert the turner to impending contact with fasteners and gives them time to react.
Screws used to secure to a faceplate should have a little free play in the screw hole. There shouldn't be any space left behind the screw when it is tightened on the glue block, since this can allow the block to shift during turning. A heavier gauge screw will also sit more securely in the faceplate. The screw should go through the middle of the screwhole in order to reduce the possibility that a screwhead might get into contact with the workpiece.
The Strike Plate
The strike plate is one of the most important parts of your door lock. It is what prevents the bolt from falling out when you close the door. The strike plate is part of the system that helps increase the strength of the lock and prevent intruders from breaking in by using force against the latch bolt and jamb.
A strike plate is an heavy metal plate that is positioned in the doorjamb, which is the vertical part of the frame. It has a hole through which the deadbolt or latch can be inserted. When the cylinder rotates and the bolt is pushed through the strike plate and into the doorjamb, keeping it closed.
There are various kinds of strike plates available, depending on your needs. If you require a strikeplate to fit your lock it will be listed in the information below the type of strikeplate you need. Otherwise, most strike plates are the same and can be used with the majority of standard locks and latches.
Standard strike plates are usually fitted with ovular screws as well as the "C"-shaped piece that functions as washer. They are typically used on doors that have corner rounded edges. They are available in various sizes to match the door.
To increase security, you can choose strike plates that have no lip and is created specifically for deadbolts. This is a great option for areas where security has to be achieved quickly, such as staircases. This is a great choice when you need to protect the equipment or documents in your home.
Another way to upgrade the security of your door is by installing the box strike plate which adds thickness and reinforcement to the strike plate. This makes it harder to get in through the latch or deadbolt, and it's often required for commercial doors equipped with a security Window lock repairs.
If your strike plate isn't aligned with the latch bolt, try spraying it with a quality lock lubricant. If this doesn't work you'll have to adjust the strike plate by drilling new holes in the screw and widening the hole for the catch. It is not recommended to make many changes to the strike plate. Repeated and drastic adjustments could cause it to lose effectiveness.
The Deadbolt
A deadbolt lock is a sturdy bolt made of metal that secures your door to the doorjamb's frame. In contrast to spring latches used in doorknobs that can be used to loid (jimmied) using credit cards or other tools such as latch slips deadbolts are locked by the use of a key, thumb turn or electronic (in the case of keyless and smart deadbolts). They are easier to use and require less maintenance. They also offer greater protection against forced entry methods like kick-ins.
The bolt is positioned from a socket in the doorjamb which is strengthened by a strike plate for extra security. The bolt should be at least 1 inch long to make it more difficult to wrench off the door. Also, you should select deadbolts with an ANSI rating, which shows how secure the lock is.
The strike plate also holds the cylinder in position. There should be three holes along the bolt: one located in the middle connects the facepiece and cylinder; the other two are to the left and right of the central hole. These are the holes where screws go to attach the cylinder to the bolt. The screws must be included with the new deadbolt. Certain locks come with decorative covers which attach to the facepieces. Follow the manufacturer's directions to ensure that they are installed correctly.
Selecting the best window lock repairs for your home requires taking into consideration your lifestyle and the security level you need. Single cylinder deadbolts are the most commonly used lock type are used on many exterior door. Keyless deadbolts are safer however they can be difficult to operate. Smart deadbolts allow you to lock and unlock them with voice commands, or through an app on your mobile.
A professional locksmith will assist you in determining which type of lock is best for your home and will install or replace upvc window lock the lock. Upgrade your front door lock to enhance the security of your home. For an added layer of security, you could think about adding a reversible double glazed window lock repair-cylinder deadbolt to the inside of your door.