UPVC Window Handle glass replacement window
Replacing a broken window handle is a relatively simple process and, with the right tools, it can be done quickly. It is important to know the type of handle and its spindle length before buying an alternative.
Older uPVC glass window Replacements handles have a spur that extends and is locked over the wedge striker for cockspur. They can be left- or right-handed and must be matched when replacing.
What kind of lock and handle do I have?
There are many kinds of window handles made from upvc and locks, each with their distinct advantages and functions. The type of handle that you have will determine whether or not your locking mechanism is effective and if it is easy to open windows. As time passes and with regular usage, the window handles made of upvc can become damaged or worn out, rendering them less effective and secure. In some instances they might even be completely removed. It is important to repair your upvc window handles immediately if you notice them falling off. This will help avoid burglaries and protect your home from burglary.
It is a good thing that replacing your window handles made of plastic is a simple task that can be done by nearly anyone. You'll need a few tools, but with the right knowledge, it is simple and should take only a couple of minutes. You must know the type of lock or handle you have on your window. This will allow you to choose the right replacement.
Inline Espagnolette Handles
They are typically located on the sides of the window. They are flat and come with an open latch that is connected to the locking mechanism of the window frame. Inline upvc handles have a spindle that runs through the center of the handle and into the window frame to operate the latch.
Cockspur Handles
They are typically found on older uPVC window frames and feature an unusual hook-shaped design. Cockspur handles have a single screw that secures the handle to the frame of the window and aren't as secure as other types of window handles.
Handles that turn and tilt
The tilt and turn handles are different from other upvc handles in that they can be turned to open the window and then tilted to the window to let air circulate. Generally, they have a 7mm spindle at the back of the handle. They are available in left and right-handed versions.
When purchasing double glazing replacement windows handles made of upvc It is crucial to check the spindle length as not all are the same size. Drop something into the middle of the hole to measure the length. This is the length of the spindle that will fit your window.
What is the spindle?
uPVC window handles function in a similar way as doors. By turning the handle, you will be able to open a latch in the frame. This opens the window to allow it to be opened and closed. However, sometimes handles can be damaged, particularly when they are frequently used or exposed to extreme weather conditions. It is possible to replace the handles on your uPVC window if they are not able to operate it properly.
There are many types of uPVC handle options, such as Espag, Cockspur, and Spaded handles. They are designed in a variety ways to fit into uPVC frames. Each handle type uses an individual spindle to lock the window mechanism. It is essential to determine the kind of handle that is installed on your uPVC windows so that you can replace it with the correct one.
You can find out what kind of uPVC handle you are using by looking at the base section of the handle. A snap-in cover should be over the screw that holds the handle's base in place. Take it off and you should be able see the second screw located at the opposite end of the base of the handle. Once both screws have been removed, you should be able pull the handle from the uPVC.
Once you have removed the uPVC window handle you need to remove the spindle you have removed from the locking mechanism. Take note of the length of the spindle. You'll need to buy a replacement of the same length as the original handle and locking device.
The spindle wears out and is unable to operate the locking mechanism. This could be due damage caused by constant use or loosening of the locking mechanism, or even corrosion that occurs over time. If this happens, it is required to replace the window handle as well as the locking mechanism to restore complete functionality to your uPVC windows.
How do I remove my old handle?
Over time and through everyday use, window handles can become damaged or broken, and if this happens, it is crucial to repair them as quickly as possible to ensure the safety of your home. It is good to know that replacing a worn or damaged handle is a fairly simple job that can be completed in just over an hour and doesn't require any specialized tools.
To remove the old handle, first remove the screw located at the bottom of the handle. Once the screw is removed, the handle can be pulled away. There is a second screw that is located at the bottom of the handle base, and this can be removed too. After these two screws are removed, the handle can be detached from the base of the window.
After removing the handle and fixing holes, align the holes of the new handle with the holes already present in the window frame. If there is a cap or sticker on the new handle, take it off it if needed and screw the handle into place. It is crucial to verify that the handle works once it has been installed. Turn the handle over and ensure that the lock mechanism is activated.
Espag handles come with a spindle that protrudes from the handle and slots into a multipoint locking mechanism in the double glazed window replacement frame. Cadenza windows feature a blade with cutouts that are incorporated into the lock mechanism. Cockspur handles are long and hang over the frame of the window or the transom crossmember of the bar.
Once you have the new handle in place, insert the spindle into the lock in the window and then tighten it down. Replace the snap-in cover and screw cap (if necessary) once the handle is securely fixed. The handle is now ready to use to use, so try opening and closing the window a few times to check that it works properly and securely.
How do I install the new handle?
The process of changing your window handle made of uPVC isn't a big deal and the process is actually very simple. All you need is a screwdriver and a little bit of patience. The first thing to do is to ensure that the handle you have previously used is in the unlocked position and then take out any screws that are visible. you can also replace them with screw caps if needed. After removing the handle, you will need to note the length of the spindle that extends from the back. This is crucial as it will determine the type of handle that you will need to purchase.
Espagnolette handles are the most common kind of handle that is used on uPVC windows. The spindle is inserted into the handle to control the locking mechanism in the frame of the window. When the handle is turned it opens the latch on the window and allows it to open. When used regularly and over time, handles for espagnolette may be damaged.
Cadenza handles are a type of uPVC handle that is commonly used with tilt and turn windows. They have a protruding blade that operates a multipoint locking mechanism within the window. They are generally more secure than espagnolette handles since they are only accessible from the inside. They can be replaced with the same procedure as espagnolette handles however you must ensure that the new handle has an angled blade instead of a flat one.
Once you've decided on the right handle to purchase, you can simply place the new handle to the existing screw holes, and then screw it into place. Then, put the screws back on and verify that your new handle is operating properly. You can accomplish this by moving the handle between the locked position to the unlocked one for a few times. It may be worth contacting an expert to determine if you can resolve any issues. They can often advise you on the best way to resolve the issue in a speedy and efficient way.