Sash Lock Door Handles
If you're looking to improve the security of your home, without compromising the aesthetics, choose sash lock door handles. They can be used in conjunction with a mortice lock or sash lock and can also be combined with the nigh latch to offer additional security for doors.
These handles are made up of a handle and a lever placed on a backplate. They are compatible with three or five-lever mortice locks. They can also be combined with a tubular latch.
Lever Lock Handles
There are many types of lever handles that will fit any style. Rustic lever latches work well with ranch or farmhouse style decor and are also very popular in modern homes. Classic lever handles are round or spherical and are easy to grasp. They are easy to use, inexpensive and can be used with any home decor. Select polished or satin nickel chrome handles for an elegant appearance. These finishes are easy to clean and durable. Other options include antique bronze and polished brass. Many handles have a decorative design, like small amber worm eyes or long-horned crystals. Some levers feature pins, stars or any other design molded into the bottom.
To replace your lever lock door handles, first make sure you have the right screwdriver or tool to remove them. Based on the design and model you may have to use an awl or nail to remove the lever handle. Some lever handles feature tiny holes or a notch at the bottom of the handle which can be used to pry them open.
Follow the manufacturer's guidelines to remove your old handles after you have the proper tool. You'll need to determine the size of the spindle on your new lever handle. Doors from the past could have been morticed to accommodate previous latches and locks, which require a specific spindle. Most lever handle manufacturers offer the same standard door spindle size for handle.
If you wish to replace a sash-lock door handle, remove the handle that was previously used and disconnect the tubular latch bolt from the strike plate on the door frame. The next step is to drill a hole into the door frame, then insert the latch bolt through, and connect it to the strike plate within the door frame.
It is important to remember that when installing new lever handles, all handles that comply with the ADA (Americans with Disabilities Act) are designed to operate by hand. The user should not be required to grip their hands tightly or twist their wrist. To meet ADA compliance standards the lever door handle must not be operated using only the thumb and finger or even the entire hand.
Sash Lock Handles
The primary purpose of sash lock door handles is to pull the moving sashes together to form a seal. This helps maintain the interior temperature of the house and also prevents drafts. They also work well for doors that don't need the security of keys for locking systems.
Mortice sashlocks are locks that incorporate a deadbolt and latch into one case. They are inserted to the door's material. They work in conjunction with doors with handles, and there are many different options to choose from to match your home.
The lever lock handle is operated by a lever that has an opening in the backplate below. This allows a key inserted into the mortice sash to operate it. It's most commonly used on doors that are not locked like living rooms and dining areas however, it can also be used with a tubular latch for an internal door that is more secure.
These are designed to hold the pvc sash windows together for multiple times and have hooks that fit inside the keeper. They come in a variety of styles and designs that are suitable for various window types like sliding or hinged casement windows. Some are made from cast aluminium while others are made of brass or iron. These are available in different colors to match other components of the door furniture like escutcheons to secure the keyhole.
The 3 lever sash window replacement locks are suitable for use on doors with internal doors. They do not offer the security level required by insurance companies. They are also less vulnerable to forced entry than their five lever equivalents, making them more vulnerable.
A door double glazed sash windows wood that has five levers is the best choice for exterior doors. It offers greater levels of resistance to forced entry, and is harder to bypass or pick. These locks have an enhanced design that has been tested and certified to comply with the strictest fire, disability and building requirements.
To replace a sash-lock handle take the old fastener from both ends by taking off the screws. Make sure you have a screwdriver on hand, and carefully separate the pieces to ensure that there is no damage. Mark the screw holes using a pencil so that you can align the new fastener properly when you are ready to install it. Clear away any dust or flecks of paint and then screw the new fastener in. It is important to test the handle to make sure it operates correctly and creates a tight seal.
Tubular Latch Handles
The tubular latch is an internal latch that can be operated by turning the handle. It is designed to close the door, but it does not secure the door as mortice locks would. They are most commonly used on internal doors, where locking is not necessary. They can be fitted with lever or knob handles.
Tubular latches are available in various sizes. The sizes range from low-cost to the luxurious architectural. The size you choose depends on the use of the door as well as whether you require a lock function. If you need an emergency release mechanism that can be triggered by thumbs an emergency, you need a lockable latch.
The selection of the correct latch is dependent on the backset measurement of your door. This is the distance between the edge of your door and the middle of the hole that is used for the door handle knob or rose, and you should choose a latch with an identical backset measurement. This will ensure your handle/door knobs will operate the latch with ease.
If you are installing a lever or knob with a spring, or without spring, it's essential to choose an extremely robust tubular latch. It should have a wooden double glazed sash windows-sprung follower. This will provide an easy operation for the latch and stop it from becoming sluggish and unresponsive with regular use.
The next step is to mount the latch onto the door. The first step is to make sure that the latch is aligned to the top of your door frame/casing. Note the location of the plate and drill holes. Using a countersink drill bit will aid in creating the right recess to sit comfortably in.
Once the latch is set after which you can attach it to the door. It is important to check that it is functioning properly before putting in your door handles and putting in the locks, so be sure to test it by opening and closing the door several times. If it's not working correctly, try lubricating the door with WD40. Then try it again. If you're still having problems, it may be necessary to call an expert locksmith or installer.
Keyhole Handles
The keyhole handles are used with a tubular latch installed in the door. This latch is used to open and shut the door. The handle is able to engage the latch when pushed down, and releases it when pulled up. These types of handles are typically used on internal doors such as living rooms and dining room doors but can also be fitted to front doors when paired with the nightlatch.
Door knobs are a contemporary type of handle that combines a sprung lever/handle on a round or square fixing rose that has a matching thumb turn or an escutcheon. They are available in various styles and finishes to match the doors in your home. They can be used in conjunction with Euro cylinders or multipoint locking systems for added security. This is achieved through several points of locking along the door's height. It is also necessary to have doors with handles that are compatible and have the correct lock centre dimension to accommodate the barrel of the cylinder.
A keyhole escutcheon covers the existing keyhole in the door to hide it and give the handle a stylish appearance. They come in both a pop on or screw on design and come in a variety of finishes that match the door handle. Alternatively, a concealed escutcheon is able to be attached to the door's edge to further conceal the keyhole and create an updated look.
The majority of the handles described above are designed to be used with either a mortice or the sash lock mechanism. However certain handles are compatible with Euro Cylinder locks too. They are designed for uPVC doors and require door handles with a Euro cutout for a cylinder and the appropriate screw holes in the backplate to accommodate the euro cylinder. These handles also require an Euro cylinder escutcheon or a standard escutcheon, based on the application.
It's important to know the distinctions between a box sash windows or mortice lock and a tubular latch, and also the compatibility requirements for each. You will need to take into account the door thickness, the door hinges, the frame reinforcements, the size of the backplate for the handle, the lock's central dimensions and the screw centres on the cylinder.