Sash Lock Door Handles
If you're looking to improve the security of your home without compromising the aesthetics, choose sash lock door handles. They can be utilized with a mortice lock or sash window repair locks and can be combined with an nigh latch to provide additional security for your door.
The handles are made up of a lever/handle on backplates and are typically used with a three or five lever mortice lock. They can also be used with an elongated latch.
Lever Lock Handles
There are many different types of lever door handles available to match the decor of your home. Rustic lever locks are popular in both modern and farmhouse-style homes. Classic lever handles can be circular or spherical, and are easy to grasp. They are easy to use and cost-effective and can be utilized with any type of decor. Choose polished or satin nickel chrome handles to create a sophisticated style. These finishes are easy to clean and durable. Antique bronze and polished brass are also options. A lot of handles feature a decorative design, such as small amber worm eyes or long-horned crystals. Some levers have pins, stars or other shape molded in the bottom.
To replace your lever lock door handles first ensure you have the correct screwdriver or other tool to disassemble them. You may need an awl or nail depending on the design and model. Some lever handles feature a small notch or hole on one side of the base which can be used to break it open.
Follow the manufacturer's guidelines to remove your old handles once you have the correct tool. You'll need to determine the size of the spindle on your new lever handle. Doors that are morticed (cut into the door) for previous latches or locks, and need to be fitted to a specific spindle size. The majority of lever handle manufacturers have the same standard door spindle size for handles.
If you are replacing sash cords the handle of a sash lock the handle that was previously used must be removed and the tubular latch bolt, that is located within the door, needs to be removed from the strike plate in the door frame. The latch bolt has to be put through a hole in the door's frame and then connected to the strike plate.
When installing a new lever door handle, it is essential to know that all ADA (Americans with Disabilities Act) compatible handles are designed to be operated by hand and must not require the user to tighten or turn their wrists. In order to meet ADA standards for compliance, the lever door handle can't be operated using only fingers and thumbs or even the entire hand.
Sash Lock Handles
The primary function of sash lock door handles is to pull the sashes that are moving together tightly to create a seal. This prevents drafts from entering the room and helps maintain interior home temperatures, saving energy bills throughout the year. They also work well for doors that do not require the security of a keyed locking system.
Mortice sashlocks are sash locks that combine deadbolt and latch in one case. They are inserted to the door's material. They work in conjunction with doors with handles and there are a myriad of different options available to suit your home.
The lever locks are operated by a lever with an opening cut into the backplate below. This allows a key that is inserted into the mortice frame to operate it. It's most commonly used for doors that don't lock, such as dining rooms and living rooms however, it can also be used with a tubular latch on an internal door that is more secure.
They are designed to hold the sash in place for multiple times, and also have a hook that fits in the keeper. They're available in different styles and designs that can be fitted into various window types, such as sliding or hinged casement windows. Some are made of cast aluminum while others are brass or wrought iron. They're available in a variety of finishes that match other components of your door furniture, for instance, escutcheons that guard the keyhole.
3 lever sash locks are suitable for internal doors however they are not suitable for external doors since they don't provide the security level required by insurance companies. They also are less resistant to forced entry than their five lever counterparts, which makes them more vulnerable to attack.
A door sash with five levers is the best option for external doors. It offers higher levels resistance to forced entry, and is harder to pick or bypass. These locks are a new design that has been tested and approved for compliance with stringent building regulations, fire and disability.
The first step in replacing a secondary glazing sash window lock handle is to remove the old fastener by removing the screws from each end. Make sure you have a screwdriver handy and carefully separate the pieces to avoid damage. Mark the screw holes with a pencil so that you can align the new fastener properly when you are ready to install it. Remove any dust or flickers of paint before screwing the new fastener into place. Test the handle to ensure it functions properly and creates an airtight seal.
Tubular Latch Handles
The tubular latch is an internal latch that can be operated by turning the handle. It is designed to latch a door shut but does not secure it like mortices. They are typically used on doors that are internal, and where locking is not necessary. They can be fitted with lever or knob handles.
There are many sizes of tubular latches that are available. They range from basic to top-of-the-line architectural quality. The size of the door is contingent on the purpose for which it is used and whether it is equipped with locks. If you need an emergency release mechanism that can be triggered by thumbs an emergency, then a lockable latch is needed.
The backset of your door will influence the latch you choose. You must select a latch that has a backset measurement that matches the distance between the edge and the center of the door's hole to accommodate the handle rose/knob. This will ensure that the knobs and handles can operate the latch without a hitch.
If you are installing a knob or lever with a spring or without spring, it is crucial to select a heavy-duty tubular latch. It should have a double glazed timber sash windows-sprung follower. This will ensure a smooth latch operation and prevent it becoming sluggish or ineffective after prolonged use.
The next step is to mount the latch on the door. First, make sure that the latch is in line with the top of the door frame/casing by measuring and marking the location of the latch plate, then drilling holes for it. Countersink drill bits can aid in creating the proper recess that allows it to fit comfortably.
Once the latch is in place after which you can attach it onto the door. Before installing your door handles or locks it is crucial to ensure that the latch functions properly. To check this simply open and close the door a few times. If it's not working correctly try lubricating your door using WD40. Then try it again. If you're still having problems, it might be necessary to contact an expert locksmith or installer.
Keyhole Handles
Keyhole handles work with a tubular latch installed in the door. The latch is used to open and close the door. When the handle is pushed down, the handle is engaged with the latch, and pulling it up, it opens the door to open. The handles are typically used on interior doors, such as those in dining and living rooms. However they can also be affixed to front door if paired with a nightlatch.
Door knobs are modern handles that combine an sprung lever/handle, a square or round fixing stem, and a matching thumb-turn or escutcheon. They are available in a broad variety of styles and finishes to match different doors in the home. They can be used with Euro cylinders or multipoint locking systems to provide added security. This is accomplished through a variety of points of locking along the door height. It requires doors with handles that are compatible and have the proper lock centre size to fit the barrel of the cylinder.
Keyhole escutcheons are an escutcheon that covers the door's existing key hole to conceal it from view and provide an attractive appearance to the handle. They can be purchased as either a screw-on or pop-on design and are available in a variety of finishes to match your door handle. A recessed escutcheon that is affixed to the edge of the door to hide the keyhole further and give it a modern look, can also be utilized.
Certain handles are compatible with Euro-cylinder locks. They are designed for uPVC doors and require compatible door handles with a Euro cutout for a cylinder and the appropriate screw holes within the backplate to accommodate the euro cylinder. These handles also require an Euro Cylinder escutcheon, or a standard escutcheon, based on the use.
When choosing mortice lock, sash lock or tubular latch for your door, it's important to know the distinct features of each and the requirements they must meet to work with other components of your uPVC door system. You'll need to think about the door's thickness as well as the door hinges and frame reinforcements as well as the door handle backplate size, lock centre dimensions and the screw centres for the cylinder.