Bio-Fires - An Eco-Friendly Alternative to Real Fires
Biofires are a warm and cosy way to heat your home without releasing harmful gases or soot. They are easy to set up and operate, just like an electric fire.
The BARDA contract supports the development of the BioFire emerging CoV panel, a nucleic-acid Amplification test that will be used with BioFire filmArray Systems for the detection of known and emerging human acoronaviruses in nasopharyngeal or swabs as well as saliva samples.
Eco-friendly
corner bioethanol fireplace log burner fireplace - https://olderworkers.com.au/author/dqycd1199h-sarahconner-co-uk/, is an eco-friendly alternative for gas or wood. The fuel is produced with plant by-products, and an organic process converts sugars into alcohol. It is a better choice over other fireplaces as it does not emit harmful emissions and also has lower carbon footprint. Bioethanol is also a safer option than other fires, since it doesn't create soot or smoke. It does not require a flue, and can be used in the garden or at home.
A multi-drug resistant (MDR) bacteria is among the most serious health threats of our time. Fortunately, new testing methods can help identify MDR bacteria and other infections earlier to prevent further complications. One such test is the BioFire FilmArray multiplex PCR system. This test uses a symptom-driven approach to detect common pathogens that cause sepsis. The results are available within an hour so that providers can start treatment immediately.
The process of Molecular PCR that amplifies DNA or RNA molecules into millions to billions of copies. This allows for the analysis of small amounts of body fluid or tissue to determine if certain genetic sequences are present. It is a useful tool for laboratory professionals and can help them detect serious diseases in a cost-effective and efficient manner. The BioFire film array PCR system is a revolutionary tool for infectious diseases diagnosis. It can be used in various settings such as hospitals and laboratories.
For tests of your respiratory system, you could apply a swab of alcohol to your nose prior to sending it to the lab. BioFire's technology provides a rapid turnaround time and allows doctors to respond quickly. This means less time waiting for results and improved outcomes for patients.
The Chanouf Farm Biofire company has created an Agroforestry waste recycling system, which makes use of pear and olive tree waste to create biochar and biomass energy. The resulting products are sold to the general public as a sustainable alternative to traditional coal briquettes and wood charcoal. In addition the bio-waste products can be used to fuel a Kachelofen fireplace which produces radiant heat that is greener than electric and gas fires.
Clean burning
When you utilize a bio fire you aren't just reducing energy consumption, you're also helping the environment by using a renewable fuel source. The combustion of bioethanol does not release harmful gases such as carbon dioxide. Instead, it releases heat and water vapour. This makes it a cleaner and safer option for indoor use.
Ethanol is made from the fermentation of plant sugars and is classed as an energy source that is renewable. It is produced in a short time, and it will not be depleted like fossil fuels, such as coal and oil. bioethanol fireplace suite reduces dependence on imports from abroad and increases the chance of shortages.
Bio-fires are easy to install and can be used in existing fireplace openings or as an independent unit. This makes them a convenient alternative to gas and wood fires. They are a great option for offices and homes that don't have a chimney.
When a bio fire is ignited, a special media is built into the burner that absorbs liquid fuel ethanol while making it available to burn. The ethanol fuel is burned in the flames, and the vapors are released into the air via the vent. This gives the flames a more natural look and a stunning beauty that can't be matched by gas or wood fires.
Another advantage of bio-fires is that they don't require vents or flues to replenish the oxygen used during combustion. They don't release carbon monoxide which is released into the room when gas fireplaces are open-fronted.
The BioFire Respiratory panel makes use of multiplex PCR to simultaneously test for respiratory pathogens. It takes around an hour. This enables doctors to identify and rule out respiratory illnesses more quickly than they could with conventional laboratory tests that require patients visits. This means less time and more money for both patients and the health care system.
Safe indoors
bio fuel fireplace-fires are far safer to use indoors compared to real fires, since they produce no smoke or ash, nor carcinogenic fumes. The bio-fires don't produce carbon monoxide that can be deadly if inhaled. However bio-ethanol fuel is flammable, so you must be careful when handling your burner and refilling it. It should be filled only after the burner has been turned off and the flame is cool. Any spills should be cleaned immediately.
The diagnostic panels of the company FilmArray systems - BioFire 2.0 and BioFire Torch--are easy to use and run eight different commercially available US Food and Drug Administration cleared diagnostic panels as well as three additional panels that have been approved for use in emergencies, and six environmental test panels. These tests include a respiratory test panel designed to quickly detect and differentiate respiratory diseases such as COVID-19, emerging coronaviruses and COVID-19.
The COVID-19 panel was awarded a grant by the Biomedical Advanced Research and Development Initiative (BARDI) which is part of the US Department of Defense's Strategic Access Program. The COVID-19 test is an antigen-based one that allows clinicians to differentiate between symptoms caused by COVID-19 and other respiratory illnesses with nearly the same accuracy as the current rapid antigen tests being used.
The company is also developing an SARS-CoV-2 test to be used in its Respiratory Panel 2.1. This multiplexed nucleic acids test for amplification will be available on the BioFire filmArray 2.0 and Torch Systems and will detect SARS CoV-2 and 21 respiratory pathogens in saliva and nasopharyngeal samples in less than a half hour. The assay is being developed on an accelerated timeline and submission to the FDA for EUA and 510(k) approval is expected in Q3 of 2020.
Although bio-ethanol flame-effect fires are extremely safe to use, they should be kept away from combustible materials such as pillows, blankets, and curtains. They should not be placed near anything that may catch fire, and you should always keep flammable materials at least 10 feet from them. The bioethanol fuel must be stored in a dry, secure area where it cannot be easily accessed by pets or children.
Simple to use
The bioethanol fires near me fireplace doesn't have a chimney to worry about. All you require is a secure location to put it in and some fuel. Once you've filled it with fuel, you can light it. This will produce the appearance of a fire that is like a real fire. Once the flame has started it will heat the room, but it will emit minimal or no smoke. It will also produce heat, similar to a wood-burning fireplace bio ethanol. They are also simple to maintain and don't require any maintenance. A quick wipe down is all they need.
The BioFire RP2.1 Test, EZ unlike other tests that employ a syndromic method to identify the symptoms of common infections, can provide results in 45 minutes. This test is suitable for patients with symptoms of upper respiratory tract and has a specificity of 98%. The test can identify up to 19 viruses and three bacteria in one sample which makes it a good choice for patient management.
The BioFire system combines multiplex PCR testing, sample preparation and reporting of results into one integrated platform. This allows laboratories streamline their workflow, and eliminates the requirement for a sequential process that involves individual and send-out test. This can result in improved patient outcomes by enabling the correct test to be administered first time, and also by removing the need for costly culture-based tests. Additionally to this, the BioFire system can identify pathogens and their associated resistance genes to antimicrobials at the molecular level, giving information that is more sensitive than traditional methods.
Molecular diagnostics are being used to improve the care of patients and outcomes. The BioFire panel RP2.1+ employs an syndromic approach to simultaneously focus on 23 pathogens that are frequently implicated in respiratory infections. The test is available on the BioFire film array 2.0 and Torch systems and provides results within 45 minutes.
In the US this test is currently available under FDA Emergency Use Authorization (EUA) and will be made commercially available once initial DoD demand is satisfied. In addition the BioFire Defense Team has developed a fully-automated, sample-to-result assay to quickly identify of COVID-19. This assay is currently under development and will be made available once the initial DoD demand is met.