Sash Lock Door Handles
If you're looking to improve the security of your home, without compromising aesthetics choose sash lock door handles. They're used with a mortice latch or sash lock. They can be used in conjunction with a night latch to provide additional security for doors that are internal.
The handles consist of a lever/handle mounted on a backplate and are generally used with a three or five lever mortice lock. They can also be used with an elongated latch.
Lever Lock Handles
There are many kinds of lever handles that will fit any decor. Rustic lever locks are popular in both modern and farmhouse-style homes. Classic lever handles are either round or spherical and are easy to hold. They are easy to use, inexpensive and can be used with any type of home design. Choose satin nickel or polished chrome handles for a classy style. These finishes are easy to clean and are durable. Antique bronze and polished brass are also options. Many handles have a decorative design, such as tiny amber worm eyes or long-horned crystals. Others have a star or pin shape built into the base of the lever.
To replace the lever lock door handles first ensure you have the correct screwdriver or a tool to take them apart. Depending on the design and model you may have to employ an awl, or nail to remove the lever handle. Some lever handles have tiny holes or a notch at the base of the handle which can be used to pull them open.
Follow the manufacturer's directions for removing your existing handles once you have the correct tool. You'll need to verify the size of the spindle of the new lever handle. Doors that are in use might have been morticed for previous latches and locks, that require a particular spindle. Most lever handle manufacturers have the same standard door spindle size for handle.
If you wish to replace a sash-lock door handle, remove the handle that was previously used and disconnect the tubular latch bolt from the strike plate that is on the door frame. The latch bolt needs to be put through a hole in the door's frame and then connected to the strike plate.
When installing a new lever door handle, it is crucial to remember that all ADA (Americans with Disabilities Act) compliant handles are designed to be operated with a hand and must not require the user to tightly grip or turn their wrists. In order to comply with ADA standards of compliance, the lever door handle can't be operated using only the thumb and finger or the entire hand.
Sash Lock Handles
The main function of sash lock door handles is to pull the sashes moving together tightly to create a seal. This stops drafts from entering the room and helps maintain interior home temperatures, saving energy bills throughout the year. They are also great for doors that don't require the security of keys for locking systems.
Sash locks are sometimes called mortice sashlocks and combine the latch and dead bolt into a single case that is inserted to the surface of a door. They are used in conjunction with door handles and are available in a variety of choices to match your home.
The lever handles for locking is operated by a lever that has an opening in the backplate below. This allows a key inserted into the mortice sash to turn it. This lock is most commonly used on doors that are not locked like those in living rooms and dining rooms. However it can also be used with a tubular lock to provide the security of the door.
These are designed to hold the sash in place at various points, and include hooks that fit inside the keeper. They are available in a variety of styles and designs that are suitable for various window sash replacement types like sliding sash window locks or hinged casement windows. Some are made of cast aluminium while others are brass or wrought iron. They're available in a range of finishes that match other elements of your door furniture such as escutcheon plates that secure the keyhole.
The 3 lever replacement sash windows cost locks only suitable for use on doors with internal doors. They do not offer the level of security required by insurance companies. They also have lower resistance to forced entry, which makes them more vulnerable than their certificated 5 lever counterparts.
A door sash that has five levers is the ideal choice for exterior doors. It offers greater levels of resistance to forced entry and is more difficult to bypass or pick. The locks are a revolutionary design that has been tested and approved to meet the strict building regulations, fire and disability.
To replace a handle on a sash-lock, remove the old fastener from both ends by taking off the screws. Make sure you have a screwdriver on hand, and carefully separate the components to ensure that there is no damage. Mark the screw holes using pencil to ensure that the new fastener is properly aligned when you are ready to put it in place it. Clean any paint or dust particles, and then screw into the new fastener. Test the handle to make sure it is working correctly and forms an airtight seal.
Tubular Latch Handles
The tubular latch is an internal latch which is operated by turning the handle. It is designed to shut the door however, it doesn't lock the door like mortice locks would. They are typically used for doors with internal doors, where locking is not required. They can be fitted with lever handles or knobs.
There are a variety of sizes of tubular latches available. These range from economy through to high-end architectural quality. The dimensions of the door depend on the purpose for which it is used and whether it is equipped with an lock. If you need a thumbturn release mechanism for an emergency, a lockable latch is needed.
Choosing the right latch also depends on the backset size of your door. This is the distance between the edge of your door and the middle of the hole for the door handle knob or rose, and you should choose a latch that has the same backset measurement. This will ensure your handle/door knobs can operate the latch with ease.
If you are fitting a sprung or unsprung lever or door knob then it is important to select a heavy duty tubular latch with a double-sprung follower and tongue. This will ensure a smooth operation for the latch and keep it from becoming slow and ineffective with frequent use.
Once you have selected the appropriate latch to meet your needs the next step is to attach it on the door. The first step is to make sure that the latch is leveled with the top of the door frame or casing. Note the location of the plate and drill holes. Using a countersink drill bit will aid in creating the right recess to rest comfortably in.
Once the latch is in place, you can then screw it onto the door. Before installing your door handles or locks, it is important to make sure that the latch is functioning correctly. To check this you need to open and close the door several times. If it's not working correctly try lubricating your door with WD40. Then re-try it. If you continue to experience problems, it may be necessary to contact a professional installer or locksmith.
Keyhole Handles
The keyhole handles are used with a tubular latch that is installed inside the door. This latch is used to open and shut the door. The handle engages the latch when pushed down and releases it when pulled up. These kinds of handles are typically used on doors with internal openings such as living rooms or doors for dining rooms, but they can also be fitted to front doors if combined with a nightlatch.
Door knobs are modern handles that combine spring levers/handles with an oval or round fixing stem and a thumb-turn or escutcheon. They are available in a variety of styles and finishes to suit the doors in your home. They can be used with Euro cylinders or multipoint locking systems to provide additional security. This is accomplished by locking the door at several points along the height of the door. Door handles that are compatible with the lock must be fitted with the proper dimensions for the center of the lock to fit the barrel.
Keyhole escutcheons serve as an escutcheon that covers the door's key hole to conceal it from view and create an attractive appearance to the handle. They are available as either a screw-on or pop-on design and are available in a variety of styles to match the door handle. Additionally, a concealed escutcheon is able to be attached to the door's edge to further hide the keyhole and provide a more modern appearance.
Most of the handles discussed above are designed to be used with a mortice or the sash lock mechanism. However, some of them are compatible with Euro cylinder locks too. These handles are suitable to secure uPVC door and require compatible handles with the Euro cylinder hole and screw holes in the backplate. These handles could also require an escutcheon for Euro-cylinders, or a standard escutcheon, according to the use.
It is important to understand the differences between a sash or mortice lock and a tubular latch, and also the compatibility requirements for each. You'll need to think about the door thickness, door hinges and frame reinforcements as well as the door handle backplate size, the dimensions of the lock centre and the screw centres for the cylinder.