10 Misconceptions That Your Boss May Have Regarding Repairs To Upvc Windows
Repairs to uPVC Windows
uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.
It is important to clean and oil UPVC doors and windows regularly. This will help prevent costly repairs and increase energy efficiency.
1. Broken Glass
The broken glass in your windows could cause severe damage to your home and may even be fatal. You should take the time to ensure that your windows are in good working order.
Single-pane windows are fairly simple to replace and generally fit into frames that were previously in use very easily. However, if windows with double panes are secured by internal beading it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this situation, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.
Wearing eye protection and heavy gloves is a must if you plan to remove the glass yourself. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards fall on the fabric and not onto the floor and could be trampled.
Once the glass is removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional can come out and repair the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the gap is large, you might think about the security door with an integrated window repair, as it offers the best of both worlds.
2. Sagging
uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. Over time, they can develop a variety of issues such as sagging. A sagging uPVC windows can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from becoming worse.
Repositioning the hinges can help fix a window that is sliding. First, you'll need to open the windows to access the frame. With an screwdriver, take off the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, shut your window and check for fitting. If you're satisfied with the fit of the window, you can tighten screws to keep them in place.
If you are unable to reposition the hinges, you could have to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes them to loosen. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows are waterproof and secure from draughts.
uPVC handles may also loosen up. This is typically caused by screws that have become undone over time, but it can be due to the handle mechanism wears out. Fortunately, it's easy to fix a loose uPVC window handle yourself. First, you'll need to close the window and then perform a test fitting. The joint at the corner of the sash must align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and return the mechanism to its original the position it was in.
3. Water Leaks
It is crucial to act if you awake each day to find mouldy walls and wet floors. Windows that leak water do are not just a cause for destruction of your home's structure but also hamper your efforts to control the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or not present.
This is a simple fix that can be completed by any DIYer who has the ability. Depending on the severity of the issue is, old caulking might need to be removed. It is important to keep in mind that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.
It is important to check that the drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious instances, you might have to consider replacing the window.
Moldy sills and rotten ones are another sign of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the house.
It is also important to keep in mind that if the leak is coming from between the glass of your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. This can be easily fixed by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are brittle to open, or slack and open in a breeze it could be hinges at the fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.
Nearly every home in the UK will have top-hung or side hung uPVC windows that use hinges and like any mechanical part they will wear out over time. Changing a window hinge is an easy procedure, but it is easier if you have someone to help you hold the frame up.
Check that the uPVC hinges are open and closed in the right direction. Check for the arrows on each hinge to determine which way the Window Repair should be opened.
The problem with the hinges on windows can be caused by incorrectly opening the window in a particular way or due to improper installation in the factory. Sending us a photo via our website will often resolve the problem. We are happy to give assistance.
Regular lubrication of the hinges is also necessary. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the risk of a window sticking and prevent corrosion. It is recommended to perform this every year. WD40 or other solvent-based lubricants should not be used since they can cause damage to your upvc window repairs windows.
5. Draughts
Draughts in upvc window repair near me windows can be caused by a few various factors. The hinges, also because of wear and tear, may become displaced, which can cause a gap to form between the sash and the frame. This can be easily repaired by giving them thorough clean, however if they are beyond repair it could be necessary to have them aligned or replaced. Secondly the interlock, this is on the hinge side of the window repair, can also become misaligned, again it is feasible to give them a clean but in certain cases, it may be necessary to have them replaced.
These seals are susceptible to wear and tear or get damaged over time, allowing air escape. Replacing these with high-quality weatherstripping is a good way to stop draughts. Replace the windows made of Upvc with low-emissivity lenses. This will help control indoor temperatures and lessen the possibility of draughts.
One of the most effective ways to reduce the draughts in your home is to use a draught excluder. These are typically made of fabric that are filled with some kind of filler. They can be put on the windowsill on top. They will keep your home warm by blocking cold air.
Your upvc windows can keep providing excellent insulation and security to your home with regular maintenance and repairs. It is essential to remember that all windows eventually become worn out, and it is more cost-effective to simply replace them instead of fixing them. If you are experiencing issues with your Upvc window it is recommended to speak with a professional as soon as you can.