10 Misconceptions Your Boss Shares Concerning Repairs To Upvc Windows
Repairs to uPVC Windows
uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They don't get rotten or rusty like timber and aluminum.
It is crucial to wash and oil UPVC doors and windows on a regular basis. This will save you from unnecessary repair costs and increase energy efficiency.
1. Broken Glass
If the glass in your window has been damaged, it can cause a great amount of damage to your home, which can make it very dangerous and potentially fatal. You should take the time to make sure that your windows are in good shape.
Single-pane windows are relatively easy to replace and typically fit into frames of the past easily. However If windows with double panes are secured by internal beading, it will be more difficult to get rid of the existing panes and install new ones. In this case you'll need locate some plastic spacers to assist the new pane to fit properly into the frame of the window.
Wearing eye protection and heavy gloves is essential when you are planning to remove the glass by yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall on the fabric, not onto the floor which could cause them to be trampled under.
Once the glass has been removed, it's a good idea to seal the gap with packaging tape or duct tape to block water and drafts from entering the home until a professional is able to come out and fix the window. This will also provide an obstacle to stop criminals from getting into your home. If the gap between the door and the window is substantial, you may prefer security screens that includes an opening. This will provide the best of both.
2. Sagging
Upvc window repairs windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. As time passes, they may be affected by a variety of issues that include sagging. A sagging uPVC windows could cause issues with light, draughts, and even security. It's crucial to act as soon as you realize that your uPVC windows are sliding.
To fix a sagging window you can try repositioning the hinges. First, you'll need to unblock the windows so you can reach the frame. Then, you can remove the top and bottom hinges with a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close the window and check for fitting. If you're satisfied with the fit of your window, tighten the screws to hold them in the right position.
If you can't reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to lose their tightness. If this happens, it's crucial to replace the seal as soon as possible so that your uPVC windows are waterproof and secure from draughts.
UPVC handles can also loosen. This is often caused by screws that have loosened over time, but it can be due to the mechanism of the handle wears out. It's relatively easy to fix a loose upvc window repair near me hand. You'll first need to close the window and then perform an experiment fitting. The corners of the sash need to align with the casing joint. If it doesn't then you can make use of a screwdriver to loosen the handle and then turn the mechanism back into its original position.
3. Water Leaks
If you're waking up to wet floors and damp walls every time it rains it's important to take action. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.
This is a fairly simple fix that can be completed by any competent DIYer. Depending on the severity of the issue is, the old caulking may need to be removed. It is important to keep in mind that when it is about uPVC window repairs, do not be tempted to apply too much caulk in order to make the area harder to clean and could decrease the efficiency of your energy usage.
Check that any drainage holes have no debris inside them and that the sill pan has been angled correctly to drain away from the window. In more serious cases you might have to consider replacing the window.
Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives under conditions of dampness and can spread quickly throughout the home.
If the leakage is occurring between the double-glazed glass it is more likely that the problem is with the seal than the frame. This can be easily repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are difficult to open, or loose and open with ease, it may be the hinges that are at fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.
Like any mechanical component hinges are prone to be damaged over time. The process of replacing a hinge on a window is an easy procedure, but it is easier to do with someone else to help hold the frame up.
Make sure that the uPVC hinges are open and closed in the proper direction. You can check this by looking for the arrow on each hinge. This indicates which way the window should open.
The problem can be caused either due to opening the window in the wrong way or by a poor installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are happy to offer suggestions.
Regularly lubricating the hinges is essential. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window operate and close more smoothly. It can also stop corrosion and decrease the chance of sticking. Ideally, you should perform this every year. WD40 and other solvent based fluids are not recommended since they will damage parts of your upvc window repair near me window.
5. Draughts
Draughts in windows made of upvc can be caused by a variety of various factors. Firstly the hinges, again due to wear and tear can become misaligned, this causes an opening to appear where the sash meets the frame. This can be easily repaired by giving them a good cleaning, but if they are beyond repair it could be necessary to get them re-aligned or replaced. Secondly the interlock, this is located on the hinge of the window, can also be misaligned, and again it is possible to just give them a clean but in some instances it could be necessary to have them replaced.
The seals may wear out or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures and again will reduce the possibility of draughts.
Lastly, one of the most effective methods to reduce the draughts in your home is to use an draught excluder. These are typically made of fabric which are filled with a type of filler. They can be put on top of your windowsill. These will keep your home warm by blocking out cold air.
With a little regular maintenance and repairs, your upvc windows will continue to provide excellent security and insulation for your home. It is crucial to keep in mind that all windows eventually wear out and it is cheaper to replace them rather than repair them. So, if you are experiencing issues with your Upvc windows, it is recommended to seek assistance from a professional as soon as you can.