15 Amazing Facts About Replacing Double Glazed Window Handle

Replacing Double Glazed Window Handle

Replacing a double glazed window handle is not difficult provided you follow the right steps. Firstly, you need to determine what type of handle is on the premises and take a measurement of the spindle.

Cockspur handles are still sometimes used in older uPVC windows, however they have a different height of step to the aluminum equivalent (also known as spade handles). This means they need an extended spindle.

Take a look at the Spindle

When replacing windows with double glazing, it is necessary to measure the spindle length to ensure you're purchasing the correct replacement. Spindle length refers to how far the handle extends out of the base plate or how far in it goes into the lock, and it can vary between handles. It is crucial to not remove the old handle while measuring the spindle. You might not be capable of getting a reliable reading in the event that you do.

In general, it is expected that a new handle will include a spinning part. However, you'll find that the dimensions of the spindle differ between different brands and handles, so it is advisable to verify when you purchase one. It is recommended to purchase the handle and spindle together to reduce time and effort.

Espag handles are the most commonly used type of handle in uPVC windows. They use with a locking mechanism that is concealed inside the frame that allows you to allow them to be closed and opened. They are available in a variety of styles and colors to match your home. When choosing an Espag handle for your home, pay attention to the spindle's size since it will affect how secure your windows are.

The handles are available in a variety of sizes and can be rotated to the left or to the right, based on your preference. They are an easy and efficient option for your double glazed window handles and stays.

The tilt and turn window handle is a popular handle. These handles are typically large and sturdy, since they lock in two different places when opening the windows. They are available in various finishes including stainless steel and chrome. They can also be made from brass or white uPVC to match the existing ironmongery.

Finally, there are cockspur handles which are a more traditional form of window handle that has an elongated spur which pushes up against the wedge on the frame. They are an easy and repair energy efficient window handle choice for your double-glazed window. They are available in a variety of sizes and heights of nose and nib, to suit a variety of styles.

Take the handle off

There are a variety of different kinds of double-glazed window handles that are suitable for uPVC windows. Espag handles are the most common one, since they have a spinning mechanism through them that is connected to the locking mechanisms of the frame. Other handles include tilt-and-turn ones which allow you to tilt the window to allow for ventilation or open it completely. They are typically heavier and tend to have more complex mechanisms however, they also provide more security. Certain styles of handles are compatible with key locks, offering additional security to your home.

It is crucial to check the handle prior to replacing it. This will allow you to determine whether a brand new handle or an existing handle only requires a tightening or if it is time to replace the handle. If the handle is damaged, then it will need to be replaced completely.

If the handle is loose, it could be necessary to tighten or retighten. Using a screwdriver, locate the screws in the handle and remove them. Be cautious not to use a power tool as it could cause damage to the window frame, or the handle. Once the screws are removed and set aside, place them in a secure location.

After the handle has been removed from the window frame, you can you replace window handles take it off and replace it with the new handle. Begin by putting the new handle in a way that the holes in the frame of the window align with the holes on the base of the handle. Once you are happy that they're aligned, insert the new handle and screw it into the appropriate position.

When you have finished, test your newly installed window handle by opening and closing the window several times to verify that it functions as intended. If you notice any signs of looseness or wobbling, it is crucial to tighten the screw, since this could cause the window handle to become unstable and potentially fall off.

We offer a range of replacement window handles in a range of colours that include black, white chrome, brass and chrome. We stock espag, inline, cranked and tilt and turn handles for all types of uPVC or timber windows. Based on your needs we also offer slimline handles that reduce the overall size of your handles which is ideal for situations where space is an issue.

Remove the Screws

The screws of windows are usually hidden by plastic screw covers that you'll have to remove prior to installing the new handles. They are typically located between the handle and its lower part when it is open and you can remove off the screws using a screwdriver or your fingernail. Make sure you don't lose any screws while removing the caps.

Depending on the type of handle you require you will find a variety of choices for the handle you replace. For instance, if seeking something more sleek than the standard handle then slimline models could be the best choice. These handles are designed to fit on the same spindle as standard handles, but are smaller and won't impede blinds or shutters. There are also chrome, stainless steel, and brass options available that can be used to match other ironmongery pieces in your home.

After you've removed the handle, you are able to begin making your replacement. You'll need to identify the kind of handle you have and measure the spindle length, before deciding on the replacement. The new handle to be the right size for your uPVC window and the screw holes should match the holes on your current one.

If you're ready to put in the new handle, you'll need to make sure that it is in the open position and that the spindle is in its proper position. Then, line up the fixing holes in the handle with the hole in the window. Then, insert the screws or pins. Be cautious not to over-tighten them, as this could cause the window frame crack.

After the new handle has been installed, you will need to test it by turning it to lock and unlock the window. You should do this repeatedly to make sure that the window lock works and to see if there are any problems. If you are happy with the performance of your new window handle you can replace the cap screws and put the cover back on.

Fit the New Handle

A uPVC window handle is usually expected to last many years but it is also possible to be damaged and require replacement. It is important to determine the source of damage before making a decision on the next step.

In the majority of cases, a loose window handle needs to be tightened before it can be fixed. This will require removal of the handle and then locating the fixing screws that hold it in place. Usually, these screws are hidden on the inside face of the handle, but they can be located with a screwdriver or pair of pliers. Once these are removed, you can remove the handle from the spindle.

After the handle that was used has been removed, you are able to replace it with the new one. It's a simple procedure, but you must take care to make sure that the screws are securely in place. The handle needs to be positioned correctly, and then secured.

There are a variety of handles, based on the type and size of your window. These include Cockspur handles that tilt and turn and Espag locks. Each comes with its own distinct features, so it is important to make sure that you select the right handle for your window.

It is important that you use the same handle as you did when replacing the Cadenza handle. This includes the blade's design and the fixing center. If you are using an blade handle with an angle when a flat blade should be employed, the blade will break.

Replacing a double-glazed window handle can be a fairly simple task. However, it is important to keep in mind that there are different sizes and styles of uPVC window handles, and so it is essential that you take measurements of the spindle prior to purchasing a replacement handle. If you follow the steps above, you will be able to fit an additional handle in a matter of minutes.