17 Reasons To Not Be Ignoring Repairs To Upvc Windows
Repairs to uPVC Windows
uPVC is a great choice for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they do not corrosion or rot.
It is essential to clean and oil UPVC doors and windows on a regular basis. This will reduce unnecessary repair costs and improve the efficiency of energy.
1. Broken Glass
If the glass in your window is broken it could cause a large deal of damage to your home, making it extremely dangerous and possibly fatal. It is important to make sure that your windows are in good working order.
Single-pane windows are relatively easy to replace and typically fit into old frames very easily. If you have double-paned windows that are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this situation it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.
Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass by yourself. You should also lay down a drop cloth before you begin working on the window panes so that any shards fall onto the fabric and not on the floor which could cause them to be trampled under.
Once the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional can come out and fix the window. It also acts as a barrier that will prevent any intruders from gaining entry to your home. If the gap is particularly large, you might want to consider using the security door with an integrated window as it will provide the best of both worlds.
2. Sagging
Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could be affected by a variety of issues such as sagging. A sagging upvc window repair near me window could cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from worsening.
To fix a sagging window you can try to reposition the hinges. You'll first need to open the windows to get at the frame. With the screwdriver, you'll be able to take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, close the window and check for fitting. If you're happy with the fit, you can tighten the screws until they stay in position.
If you aren't able to move the hinges, you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to lose their tightness. If this happens, it's important to replace the seal as fast as possible so that your uPVC windows are watertight and secure from draughts.
uPVC handles may also loosen up. This is usually due to screws that have become undone over time, but it can be caused by the handle mechanism getting worn out. It's fairly simple to fix a loose uPVC hand. First, you'll need to close the window and then perform an initial test to ensure that it fits. The joints at the corners of the sash should be aligned with the joint on the casing. If it isn't then you can use the screwdriver to loosen up the handle. Then, turn the mechanism to position.
3. Water Leaks
If you wake up to wet floors and mouldy walls each time it rains it's important to take action. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.
This is an easy fix that can be done by any DIYer who is competent. Depending on the severity of the issue is, the old caulking may need to be removed. It is crucial to remember that when it comes to upvc window repairs - www.longisland.com, you should not be tempted to apply too much caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.
It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious situations, you may have to replace the window.
Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This mold thrives in damp environments and is able to quickly spread throughout the house.
It is also important to keep in mind that if the leakage is coming from between the glass of your double-glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. It is also possible to be repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are stiff to open, or are loose and blow open with ease, it may be hinges that are at fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.
Like any mechanical component hinges will wear out over time. Changing a window hinge is essentially a very simple process but it can be simpler with someone else to help you hold the frame in place.
Make sure that the uPVC hinges open and close in the proper direction. Look for the arrows that are on each hinge to determine the direction in which the window repairs near me should be opened.
The problem can be caused either by opening the window improperly or due to a poor installation in the factory. This issue can be fixed by sending us a picture through our website and we will be more than happy to give you suggestions.
It is also important to grease the hinges regularly. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also reduce the chance of windows getting stuck and stop corrosion. This must be done at a minimum once a year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.
5. Draughts
Draughts in upvc windows can be caused by different things. First, the hinges because of wear and tear, may become displaced, which can cause a gap to form where the sash meets the frame. They can be fixed by giving them a good clean, but when they're beyond repair, it may be necessary to get them realigned or replaced. The interlock may be unbalanced. This happens on the hinge side and might require to be cleaned. In certain instances, it may be necessary to replace them.
The next most common reason for draughts are the window seals. These are susceptible to being worn out or damaged over time, and will allow air to escape through these gaps. Installing high-quality weatherstripping will help to stop draughts. Another alternative is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures and will lessen the possibility of draughts.
Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler, which can be placed over your window sill. They can help stop cold air from entering and keep your home warm and cosy!
With a little regular maintenance and repairs your windows made of upvc will continue to provide an excellent level of insulation and security for your home. It is important to remember that all windows eventually get worn out and it could be more cost-effective to simply replace them rather than repair them. If you have any problems with your window made of upvc window repairs near me, it's best to consult a professional as soon as you can.