20 Trailblazers Lead The Way In Fiat Panda Key Fob Replacement

Reasons Your Fiat 500 Key Fob Won't Work

A fiat 500 spare key cut 500 key fob is a convenient method to open the doors and begin the car. There are many reasons the key fob might stop working. This could be due to a dead coin battery or damaged receiver module, water damage issues, and interfering.

This listing is for an NEW replacement fiat punto keys Flip Key Remote that looks like the Ilco brand. It needs to be professionally programmed (click here to find local locksmiths in the automotive industry). It comes with lock, unlock and trunk buttons.

Dead Coin Battery

The most common reason the 500 key fob won't function is due to the battery is dead. Modern key fobs operate with a limited range of operation, and must be within just a few feet of the vehicle in order to function. If you're far from your vehicle, and you press the key fob button, the car won't respond, and will display a "Key Fob Not Detected" message in the instrument cluster.

If this occurs then replace the battery for your coin-cell (Part Number CR2032) by a new one from a reputable brand such as Panasonic Duracell or Energizer. They can be found in your local hardware store, or online.

After you've replaced the battery of your coin cell, you can test it by standing in front of your fiat replacement key cost 500 and pressing the buttons. The car should blink its parking lights and the key fob will operate the lock and unlock switches.

If the fob's remote doesn't work after replacing the battery, it could be damaged by water, which prevents it from communicating with the receiver module inside your vehicle. Water damage can occur in a number of ways, from a light splash to submerging the fob in salt water at the beach. If you suspect your fob has been exposed to water, try putting it in a dry rice bag to pull the moisture out. If this isn't working, you'll have to get your fob reset by an auto locksmith or dealer.

Water Damage

Water damage can occur when you immerse the fob in the ocean, or wash it in a washing machine. Saltwater can be particularly harmful to the fob's circuit board and can cause it to short out and eventually end up dying. It's not a good thing to submerge the fob in water, but don't give it up even if you accidentally drop the fob in water, or fail to take it out of your pants pocket.

First, remove the battery. Clean the electronic chip with isopropyl or a similar product and dry it thoroughly before replacing the battery. Test the fob afterward to verify if it's working. If the key doesn't function, it may need to be changed. This is usually handled by an auto locksmith or dealer.

If your key is older and not programmed for your vehicle it is necessary to replace it completely. A professional locksmith for cars can do this job. The locksmith will need the key to be cut to match your car's ignition. They will also need to reprogram the fob in your vehicle's system. It's a simple and cost-effective procedure which can be completed in the same day.

Receiver Module Issues

One of the simplest reasons your 500 key fob might stop functioning is because it's out of range. The remote typically has a range of 30 feet or less, and if it's too far away from your car it won't respond to your commands. This can be easily fixed by moving closer to your vehicle until it begins responding.

If your fob doesn't work after replacing the coin battery, also called a "button", "watch" or "button" or "button", it could be a problem with the internal circuit board. Reprogramming your fob can resolve the issue. You can find the instructions for most vehicles on YouTube or in the owner's manual.

It could be necessary to replace the metal clips that hold the coin batteries in their place. If they lose tension it may prevent your battery from being properly seated, causing your remote to malfunction.

In rare instances, the fob may be out of alignment with your vehicle because of hardware or software issues. It is possible to fix this issue by visiting your local dealer or auto-locksmith to reprogram your key fob. In certain situations they may have to install the software again in your body control module, as well.

Interference

Interference can also cause the key fob to not be able to receive or transmit the signal. This may happen if the keyfob is located in close proximity to a radio transmitter like a cellphone or radar detector. Other reasons why the key fob could not function may be a lack of connection to the buttons or the internal chip or water damage.

If your key fob suddenly stopped working, or you have tried everything at home to solve the issue (e.g. replacing the battery, reprogramming, and using the spare key fob, it could have a damaged receiver module on your 500. The receiver module, located under the dashboard, is able to pick up radio frequency signals from your key fob. Then, it converts them into electronic commands that the vehicle interprets.

Fortunately, there's an easy way to reset all on-board systems in your 500 device, including the key fob. Disconnect the battery for 15 minutes by taking off first the negative cable and then the positive cable. Then reconnect the battery. This will clear out any remaining electricity and then restart the car's computers. This could help get your key fob working again. If the problem persists, you should consult a certified technician. They'll be able to determine the exact cause of your problems.