7 Helpful Tips To Make The Most Of Your Saab 9-3 Key Replacement

How to Replace the Replacement Key Battery For the saab fob key replacement 9-3

Saab owners have to follow a series of unique steps to add an additional ignition key. It requires dealer service with a handheld computer dubbed Tech-2. Then the transponder is replaced and a key are required to be purchased.

Change your keys regularly to prevent one from wearing out faster than another. This will help to keep your keys in perfect condition.

Replacement Case

As opposed to the traditional Saab keys of old keys, the new key fobs contain electronics which makes it more difficult to make a copy. This has made theft of cars significantly more difficult than 20 years ago. However, it has also made the replacement of lost keys a comparatively expensive endeavor.

saab key fob 9-3 owners must have two working keys. It is costly to replace a lost key, as it requires replacing the CIM module, as well as reprogramming the locking cylinders. Dealers charge between $100-$200 for this.

There are ways to cut down on these costly costs. Some parts suppliers will look up the code on an extra key (usually the same one that opens the doors and switches the ignition) and cut a new metal key blade for less than the dealer's cost. The key must, however, be the same as the original to work correctly in your car.

You can also change the case yourself by following these steps. You'll require a flathead screwdriver as well as some patience. With the screwdriver, break apart the plastic, and then take off the emergency key. After the case is open take the electronics out and put them in the new case. Put the correct key and badge into the case.

Replacement Battery

The replacement battery for the Saab 9-3 is a cheap part that can be replaced quickly and easily. Cyclone's YouTube video Cyd demonstrates how you can replace the remote fob battery in just four easy steps. This tutorial can be used for any modern saab 9-3 key not accepted contact service (Highly recommended Internet site)-type key fob, though the process may vary slightly.

The first step is to find the button that lets off the backup key inside the fob. The button is usually found on the back of your fob just below the Saab Logo. Use a flathead screwdriver to insert the screwdriver into the tiny hole in this button. This should be enough to open the case in order to change the battery.

Once the new CR1632 battery is installed it is possible to reassemble the remote key fob and program it to your car. The entire process should take no more than an hour at most. This is a very easy procedure that doesn't require special tools.

If you lose a key, the process will be a bit more involved however, it can be accomplished. The dealer has to first verify the VIN of the vehicle before requesting a replacement TWICE module and key blade with the proper unique code. Then, they'll need to cut the replacement key and then program it using a brand new tool for programming called MDI.

Replacement Key Fob

The key fob is equipped with an internal battery that is used to lock and unlock your car. Batteries have a limited lifespan and eventually die. It is a common problem for all vehicles. The good news is that you can replace the battery on most key fobs without having to replace the entire case. Amazon sells replacement fobs that have all the electronic components in place. You can simply open the case and replace the batteries. You'll need to take out the emergency key before you replace the batteries. To do this, you need to insert a small screwdriver that is flat into the slot that is in the middle of the. Use the screwdriver to move around the case, and it will split open, making it simple to take it out.

If you're about to replace the keys, ensure you have a spare because this can cut down the total cost by a significant amount. If you have an additional key, request the dealer to cut it and program it to your car. This is a lot less expensive than buying a new key fob.

It is possible to add a second key to your vehicle in the event that you don't have one, but it requires lots of research and effort. It costs a few hundred bucks to add a second car key. The computer of the vehicle must also be programmed. This can be accomplished by a professional, however it's an expensive option for the majority of owners.

Replacement Ignition

The new saab replacement key 9-3 features an alarm system that is more sophisticated that is based on a key code. This means that in the event that you lose your only working key, adding another key can be extremely costly since the car needs to have a unique computer module added and it also needs to be specifically programmed to accept a new key. Locksmiths typically aren't able to program this, and even dealers can charge several hundreds of dollars just to program the new key!

Dealers will charge you a high price to replace your car computer (also known as the CIM or SAAB twice) in the event that you lose your only working key. We can reprogram the current EEPROM in your car computer to be ready for an extra key. This will save you more than 50% off what you would pay the dealer.

If you've owned a SAAB 9-3 for a long time you're aware that the ignition keys aren't very durable. They can become incredibly sticky and the buttons are known to fall off every now and then which is why you should think about getting a replacement if yours isn't functioning properly. It's not as difficult as it seems to replace the ignition key. With the right tools, it is able to be accomplished in a short time.