Window Repairs

Window Repair repairs can save homeowners money and help keep their homes warm. Window replacement is often required in the event of severe damage such as broken glass, or a shattered window frame.

But there are many other issues that can be fixed to prolong the lifespan of your windows. The most frequent issues are:

Cracked or broken panes

Cracked windows can be caused by a lawnmowers that throws rocks in the wrong direction or a tree branch being blown by strong winds. This is not only visually awful, but it could also lead to higher energy bills because the broken pieces allow cold air into your home. It's fairly simple to repair windows with damaged panes.

Begin by carefully removing glass with gloves and safety glasses. You may have to employ a utility knife to remove any remaining putty or old glazing compound around the edges of the frame. Next, wipe down the surface of the glass and the frame's wood with a soft cloth or paper towel.

After cleaning the area, apply silicone caulking that is waterproof around the frame's perimeter. This will prevent water from getting into the frame through the crack and causing further damage.

If you have double glazed repairs near me-pane glass window repair cracks that are severe could damage the gas layer between the panes, making your windows less efficient in insulating. If the crack is severe enough to threaten the quality of the glass or in the case of an inner pane completely missing, it might be the time to call an expert.

Cracks caused by thermal stress can occur when there's an extreme difference in temperature between the inside and outside of your home, which causes the glass to expand or contract. If this happens to two parts of a window it's recommended to replace the window instead of trying to repair double glazing window it.

For windows that have cracked but aren't yet ready to be replaced Clear tape can do a decent job of stabilizing the crack and preventing the entry of bugs and cold air. You can even cut a piece of nylon stocking or tarp that's large enough to cover the crack and stick it to the wall using duct tape. This isn't a permanent solution, but it works well in a pinch and it keeps insects and cold air out of your home. If you notice cracks or blemishes on your older windows it is recommended to contact your local business to determine if replacing the whole window is the best option.

Rotten Wood

Wood rot is one of the most common problems with windows. It can affect the appearance of a house and can also be danger to your safety. It is possible to repair the wood that has rotted. You will first need to address the cause of the wood rot. Look for leaks on the roof and other areas where water could get into the wood.

You'll then have to take off the rotten parts of the window frame. This can be done with the claw hammer, chisel or a rasp. After removing the decayed wood, you'll need replace it with new wood. It is recommended to use pre-treated wood for this project as it is resistant to decay. If you are not able to replace the damaged timber, you can use filler and wood hardener to reinforce the damaged area. This type of product will be available at a majority of hardware stores. To get the best results, follow the directions on the label.

After you have repaired the damaged areas of the window sill, it is important that you protect the area. This can be done by applying a water-resistant wood sealant. Sikkens for instance is a great one to use.

Use a two-part epoxy to protect the wood from further damage. This product is easy to apply and leaves a beautiful finish. It is important to follow the directions on the label. When the epoxy filler is dry you can sand the wood's surface. It is best to begin with a rough layer of sandpaper before moving to a smoother grade.

The last thing you would like to do is make the rotted area even worse by expose it to more water. Therefore, it is an ideal idea to cover the repaired area with an oil-based primer that will protect it from moisture. Then, you can apply waterproof wood sealant.

The W won't let you open

A window that isn't opening could be due to various factors. Wood frames can warp when exposed to wet weather, the house could have settled or someone might have closed it for security reasons. But with some patience and the right tools, many windows that are stuck can be opened.

The accumulation of gunk or debris can be a major reason of windows that aren't opening. Grime and dirt build up on the sliding tracks, hinges and locks over time, according to Acme Glass. Metal hardware may also rust if it comes into contact humidity and direct sunlight. Spraying grease on these areas to help prevent oxidation, and keep your windows functioning properly.

The pulleys that raise or lower the window could become loose, or even break. These components can lose their tension and get blocked, especially when the window is two or more stories higher than the ground.

If you are having difficulty opening a door, try using a pry-bar to gently open the door. Place a wood block on the frame to give your pry bar more leverage. Also, be careful not to damage the window or the wood. Try applying a hairdryer along the frame's edges for several minutes. This will warm the wood and make it easier to move.

Another common issue for windows that aren't opening is a broken spring that prevents the window jamb from lowering or rising. You'll need to refer to the owner's manual for more information depending on who made your windows.

If you've tried cleaning the moving parts of your windows and lubricating them, but they're still not opening, it might be time to replace windows with new, energy-efficient windows from Homespire Windows and Doors. Don't let windows in your home go from being functional to inoperable. If your windows aren't properly closed could expose your home to burglary and water damages. Contact our team for more information about our replacement windows and services today!