Ten Ways To Build Your In Wall Fireplace Empire
In Wall Fireplace - How to Choose the Right Height and Depth for Your Fireplace
An in wall fireplace provides an elegant and polished look without the expense of mantles. It is among the most simple electric fireplaces wooden to put in.
There are many factors to consider before purchasing your in-wall fireplace. To maximize the value of your investment, consider these helpful tips:.
Height
While it may appear to be an easy task to answer, determining the height of your new fireplace is one of the most important decisions you make. The height of your fireplace will influence everything, from how well it fits in a room to its visibility. The fireplace may appear odd when it is too high. It will also detract from its aesthetics. On the other hand, having your fireplace set too low will cause it to disappear in the wall space.
Electric fireplaces can be placed at various heights. The majority of people install their fireplaces sitting at eye level. This typically requires a height of 40-42 inches from the floor to the bottom of the fireplace. Some people mount their fireplaces under their TVs. This can be an attractive option.
However, the exact height of your fireplace will depend on a few things, including the size of the room and the length of the wall you want to mount it. The larger the space, the larger it can be. This could mean you are in a position to fit a bigger fireplace in it. The length of a wall is also important, as a longer wall can accommodate a bigger fireplace.
The way you intend to make use of your fireplace is an important factor. If you only intend to use it for ornamental purposes, a lower size will be the best. If you intend to heat your home using it, you'll need ensure that the fireplace is tall enough to satisfy the local codes and safety standards.
It is important to choose the proper height for your fireplace, so that it is in line with your decor and be easy to clean or fill. If you're not sure of the height to go with you can always contact an experienced fireplace installer for help. They'll be able determine the best height for Electric Firesuite your fireplace based on their experience and the specifics of your home.
Depth
A fireplace's depth is important to consider if you intend to put it in a recessed place. If you are going to cut your wall, make sure that you have enough space to accommodate the design of your fireplace (the smoke shelf above the fireplace box, the flue which rises through the roof, and the fireplace itself). You should also consider the space you'll need for the surround, and whether or not you want a mantle.
Many of the latest electric wooden fireplaces have a depth that is nearly concealed, giving them a "built-in" look. The Panorama BI-Deep series is a great example of this type of wall fires-mounted electric fireplace. It has a 5.8-inch deep that allows the viewer see the flames, ember bed, and not the frame. It is also equipped with a range of media options, including natural-looking driftwood logs that look like driftwood white pebbles, crystals made of clear glass that reflect the flames and improve the ember bed.
Gas wall-mounted fireplaces also come in deep and shallow models. But, when deciding the depth of your fireplace it is important to remember that these fireplaces function as a source of heat that is supplementary and must be properly vented by a skilled professional. When determining the depth for gas fireplaces it is important to take into consideration the length of the vent pipe as well as the size of the chimney.
If you decide to go with a surface mount or a one-piece installation, it's essential to follow all of the manufacturer's instructions carefully when mounting your fireplace. A professional installer is recommended in most instances. It is also recommended to have a second person on hand for the installation of an fireplace.
Addition of an in-wall fire place to your home is a fantastic option to enhance it and create ambience. It also can help reduce your heating costs. Furthermore, it's a great option if you cannot install traditional fireplaces in your home due to space constraints or due to the location of an existing chimney.
Surface Mount
Surface mounts are a great option if you don't want to or aren't able to cut into the wall to install an electric fireplace. They also give it a sleek, integrated look. Some models, such as the Allusion line, can be mounted partially recessed in the wall without compromising aesthetics or heat output.
To begin the installation, mark the wall with a pencil where the bracket is to be placed. Use a stud-finder for locating the studs and place each bracket in front at least one stud to ensure stability. If a stud is not accessible or isn't suitable for your fireplace, make use of drywall anchors to help support the mounting bracket.
Once you have marked the location of mounting brackets on the wall, use a power drill to screw them in and make sure they are aligned correctly with the studs. You can use plastic anchors or studs to secure each bracket. Once the mounting brackets are installed, lift the fireplace and hang it from the bracket. Once it's secure, check the position of your fireplace to make sure that it's level and not crooked in the opening.
Before you proceed with the installation, connect your fireplace and ensure that all features are working properly - turn on the fire and ignite the flames, play around with heat, ember bed lights and so on. Once you are happy with the results, it's time to put in the floating mantel.
Depending on your fireplace's model, you will either need to connect the wire connection to the appliance connector located at the mantel's bottom, or if it has hooks or slots, connect them to the slots on the brackets for mounting. Once you've completed this step make sure to consult the user manual for directions on how to remove the front glass panel from the opening and replace it.
Once you've removed your front panel of your fireplace and placed it into its opening, follow your instructions in the manual to complete the installation by replacing the glass front and adjusting the height if required. If your fireplace is equipped with ember bed media, spread it over the top of the grate to give it a a more natural appearance and then secure it in place with the included screws.
Plug-In
Unlike traditional wood fireplaces-burning fireplaces, electric fireplaces don't require vents or chimneys. They're plugged into standard outlets and provide additional heating for rooms that can be that are up to 400 square feet. You can also adjust the ambiance with multiple heat and flame settings. Some models feature LED lighting effects that highlight the fire and embers. Certain models have a grille on top that conceals the manual controls, but it can be opened easily to reveal pushbuttons.
Plug-in electric fire places can be installed directly on the wall or recessed for the appearance of a built-in. They are typically easier to install than mantel fireplaces shop (https://cypriotdirectory.Com). Some models have a pedestal that allow you to put the fireplace on flat surfaces like a dresser or buffet. Included are an remote control, mounting hardware and the log set. Based on the model, these electric fireplaces may include both heat and flame options that can be switched off to provide ambiance throughout the year.
Certain models come with adjustable privacy glass that you can change instantly from fully transparent to partially. This option makes these models popular for walls that divide common entertainment spaces like living and dining areas. They can even be used in bedrooms where the addition of a fireplace can be a cost-effective method to cool a room without sacrificing privacy.
Although plug-in electric fireplaces don't require a hardwire like traditional fireplaces, they must be positioned on an area that is at least free of studs and able to support the weight of the fireplace. Some models come with kits to make this process more simple, including a pre-wired power cord and a bracket for mounting. This kit is available for either drywall or concrete installation.
When deciding on a place for your wall-mounted electric fireplace, make sure it's close to an electrical outlet. Plug-in electric fire places can be plugged in to outlets that are on the same circuit as the electric fireplace or into a dedicated outlet. It is recommended to use a separate circuit to ensure that nothing else in the home will operate at the same voltage, and potentially trip your breaker.