Why In Wall Fireplace Is Right For You

In Wall Fireplace - How to Choose the Right Height and Depth for Your Fireplace

An in wall fireplace provides an elegant and polished appearance without the cost of a mantle. It is among the easiest electric ethanol fireplaces to set up.

There are many factors to consider before purchasing your fireplace in wall. Follow these tips to make the most of your purchase.

Height

While it may seem like a simple question, figuring out the height of your new fireplace is one of the most important decisions to make. The height of your fireplace can influence everything, from how it fits in a room to its visibility. Your fireplace could look strange in the event that it is set too high. It can also take away from its beauty. A fireplace that is too low can be lost within the wall space.

Luckily, electric fireplaces are versatile enough to be positioned at various heights. Most people mount their fireplaces in a seated position at eye level. This usually requires a height of between 40 and 42 inches from the floor to the bottom of the fireplace. Others mount their fireplaces underneath their TVs, which can be a visually appealing option.

The exact height of your fireplace will be determined by several factors, including the size of the room and the length of the wall on which you want to mount it. The bigger the room the more spacious it will be. This could mean that you are able to fit a larger fireplace into it. The same is true for the length of the wall since a longer wall can accommodate a fireplace that is larger.

Another important factor to consider is how you plan to use your fireplace. If you plan to use it for ornamental purposes, a lower level will work better. If you're planning to use it to heat your home using it, you'll have to ensure that the fireplace is tall enough to meet the local codes and safety standards.

It is crucial to select the appropriate height for your fireplace, so that it is in line with your decor and is easy to clean or fill. If you're not sure of the size to choose it is always a good idea to reach out to an expert fireplace installer for assistance. They'll be able suggest the ideal height for your fireplace based on their experience and your particular home.

Depth

A fireplace's depth is important to consider if you intend to put it in a recessed location. If you are going to cut through your wall, make sure that you have enough depth to accommodate the design of your fireplace (the smoke shelf area above the fireplace, the flue that is able to rise through the roof and the fireplace itself). Also, think about the space you have available for the surround and if you want a fireplace mantle.

A lot of the most recent electric fireplaces have an incredibly deep depth that is hidden, giving them an "integrated" look. The Panorama BI-Deep series is an excellent example of this kind of wall-mounted electric fires fireplace. The model has an 5.8-inch depth that lets the user see the flames and ember bed and not the frame of the fireplace. It also comes with a variety of media packages, such as natural-looking driftwood logs that look like driftwood white pebbles, clear glass crystals that reflect the flames and add luster to the ember bed.

Gas wall-mounted fire places are also available in shallow and deep models. However, when deciding on the depth of your fireplace, it is essential to keep in mind that these fireplaces work as a source of heat that is supplementary and must be properly vented by an experienced professional. The length of the vent pipe, the size of the flue, as well as the distance from the stove to the vent are all elements that should be taken into consideration when determining the depth of a fireplace made of gas.

If you decide to go with a surface mount or a recess-mounted installation, it is important to read and adhere to the instructions of the manufacturer when mounting your fireplace. A professional installer is recommended in most instances. It is also a good idea to have a second person available when installing the fireplace.

The addition of an in-wall fires fireplace place to your home is a fantastic option to enhance it and create an atmosphere. It also can help reduce your heating costs. It is an excellent option if you cannot fit an old-fashioned fireplace into your home due to space restrictions or the location of a chimney.

Surface Mount

If you're not able or prefer not to cut into your wall or construct an area to accommodate an electric fireplace, a surface mount gives an elegant and integrated appearance. Certain models, such as the Allusion line of electric fireplaces, can be mounted partially recessed into a wall without compromising the heat output.

To begin the installation, mark the wall with pencil where the bracket will be mounted. Use a stud finder to locate the studs within that area and make sure the mounting bracket is placed in the front of one or more studs for stability. If a stud is not reached or isn't suitable for your fireplace, you could use drywall anchors to provide support.

After you've marked the position of the brackets for mounting, use a drill to screw them into the wall, ensuring they are properly aligned with the studs. If possible, connect each bracket to a stud to ensure strength and stability, but you could also use plastic anchors in the event of need. After the mounting brackets have been installed then lift the fireplace up and hang it from the bracket. Once the fireplace is in place be sure that it is level.

Before you begin the installation, plug your fireplace in and make sure that all features work correctly. Start the fire, experiment with the heating, the lights for the ember bed and so on. When you're satisfied with your results you can now install your floating mantel.

Depending on your fireplace's model, you will either need to connect the wire connection to the appliance connector on the bottom of the mantel, or if it has slots or hooks, connect them to slots on the mounting brackets. After you've completed this, follow your fireplace's owner's manual for specific directions for removing the glass front panel and putting it back into the opening.

If you need to adjust the height, replace the glass front after you have removed the front panel. If your fireplace has ember bed media, spread it over the top of the grate for a more natural appearance and then secure it in place with the included screws.

Plug-In

Unlike traditional wood-burning fireplaces, electric fire - just click the up coming post, fireplaces don't require vents or chimneys. They're plugged into a standard outlet that can provide supplemental heating for rooms that are up to 400 square feet in size. They also come with a variety of heating and flame settings, to allow you to customize your ambience. Some models feature LED lighting effects that enhance the fire and ember bed. Others include the top grille grate which hides manual controls but easily pops open to reveal buttons for your preferred setting.

Plug-in electric fireplaces can be mounted directly on walls or installed into the wall for an aesthetically pleasing look. They are typically easier to install than mantel fireplaces. Some come with pedestal bases to permit you to put the fireplace on a flat surface such as buffets or dressers. A remote control, mounting hardware and log set are also included. Based on the model, these electric fireplaces could include heat and flame options that can be turned off for year-round ambiance.

Some models have adjustable privacy glass that can change instantly from fully see-through to partially transparent. These types are ideal for walls that separate entertainment areas like living and dining rooms. They can also be utilized in bedrooms where adding the fireplace suite is an affordable way to reduce the chill in the space without sacrificing privacy.

While plug-in electric fireplaces don't require hardwiring like built-in versions they must be positioned on the wall that is at a minimum stud-free and capable of supporting the weight of the fireplace. Some models include kits to make this process easier, including an electrical power cord that is pre-wired and a bracket for mounting. This kit can be used for concrete or drywall installation.

When deciding where to put your wall-mounted electric fireplace, ensure it's close to an electrical outlet. Depending on the model, plug-in electric fireplaces can be plugged into outlets that are on the same circuit, or a separate one for your electric fireplace. It is best to choose a separate circuit to ensure that nothing else in your home will run at the same voltage, and potentially trip your breakers.